Casio IT-2000 installation manual Error Codes and Error Messages

4.Error Codes and Error Messages

Any termination codes and error information generated by the PC will be recorded in the error log file on the PC.

This error log file will be created according to the file name specified by the DEVICE.INI file (configuration file), and each new log entry will be appended to the file.

This error log file cannot be automatically deleted. Therefore, it is recommended to check the contents when required and delete the file.

If an error occurs on the PC side, the corresponding error message will appear on the PC's display. Since error messages are displayed for each I/O Box, a maximum of eight error messages can be displayed at one time. If an error occurs on the IT-2000 side, the corresponding error message will appear on the LCD of the IT-2000.

Session	Date	Time	Error Code		Error Message
No.			Detail	Category
0	6- 9-1997	17-44-46	0	1	Undefined function code
0	6- 9-1997	18- 1-24	0	5	Communication error
0	8- 9-1997	11-53-29	4	5	Command timeout error

Table 4.1 Example error log file

For information about the error codes and error messages and their remedies, refer to Table 4.2 "Error Codes and Error Messages".

When confirming the contents of the error log file, use a commercial editor. No dedicated editor is supplied by Casio.

23