6\VWHP2YHUYLHZ&RQWLQXHG
Zones
•The system sensing devices have been assigned to various “zones,” which are specific areas of protection (e.g., front door, kitchen window, etc.).
•Zone numbers are displayed at the keypad when an alarm or trouble condition occurs on a sensor.
Arming, Step-Arming and Disarming Burglary Protection
•The system must be armed before the burglary protection can sense intrusions.
•To arm your system, enter your user code followed by the desired arming key.
•If programmed, the [#] key can be pressed instead of entering the security code when arming the system.
•You can also use the
•To disarm the system, enter your user code then press the [OFF] key.
Alarms
•When an alarm occurs, both the keypad and external sounders will sound, and the keypad will display the zone(s) causing the alarm.
•If your system is connected to a Central Monitoring Station, an alarm message will also be sent.
•To stop the alarm sounding, simply disarm the system.
Memory of Alarm
•When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (e.g., “fire”).
•The message remains displayed even after disarming the system, but can be cleared with another “off” sequence.
Phone Access
•If included, a phone module permits you to access the system via a
•You can receive synthesized voice messages over the telephone regarding the status of the security system.
•You can arm and disarm the system and perform most function commands remotely via the telephone, with voice confirmation provided after each command entry.
•Complete information regarding the use of this feature is provided in a separate manual entitled “Phone Access User's Guide” that is supplied with the voice module.
– 6 –