First Alert FA130CP manual Individual Keys, Key Pairs

)LUH￿$ODUP￿6\VWHP￿￿&RQWLQXHG￿

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS

Manually 1. Should you become aware of a fire emergency before your smoke or

Initiating heat detectors sense the problem, go to your nearest keypad and

a Fire Alarm manually initiate an alarm by pressing the panic key assigned for FIRE emergency for 2 seconds. If a key pair has been assigned for

fire, press both keys at the same time. See the Using the Panic Keys section below for further details.

2.Evacuate all occupants from the premises.

3.If flames and/or smoke are present, leave the premises and notify your local Fire Department immediately.

4.If no flames or smoke are apparent, investigate the cause of the alarm. The zone number(s) of the zone(s) in an alarm condition will be displayed at the keypad.

Using the Panic

Key(s) Assigned

for FIRE

Emergency

A key or key pair may have been assigned for manually initiating a FIRE alarm. See the Panic Keys section for key assignments.

For convenience, indicate the key or key pair assigned for fire below.

Individual Keys

A B C

seconds.

OR

Key Pairs

1 O F F

∗ R E A D Y

3 ST A Y

Press the individual key assigned for fire for 2

and	∗ R E A D Y
and	#
		Press the key pair assigned
and	#	for fire at the same time.

DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM

* - 6 ) ￿ ￿ ￿

￿￿

AC

ALPHA DISPLAY KEYPAD

ALARM

FIRE

FIXED-WORD KEYPAD

– 42 –