TYPICAL INSTALLATION
GET TO KNOW YOUR WATER HEATER - GAS MODELS
A | Vent Pipe | J | Drip Leg (Sediment Trap) | S | Flue Baffle |
B | Draft Hood | K | Inner Door | T | Thermostat |
C | Anode | L | Outer door | U | Drain Valve |
D | Hot Water Outlet | M | Union | V | Pilot and Main Burner |
E | Outlet | N | Inlet Water | W | Flue |
F | Flexible Water Connections | O | Cold Water Inlet | X | Drain Pan |
G | Gas Supply | P | Inlet Dip Tube | Y | Piezo Igniter |
H | Manual Gas | Q | Z | Air Intake Screen | |
I | Ground Joint Union | R | Rating Plate |
|
|
*INSTALL IN ACCORDANCE WITH LOCAL CODES.
*DRIP LEG AS REQUIRED BY LOCAL CODES.
TO VENT TERMINATION
ON ROOF
(T) THERMOSTAT
(V) PILOT & MAIN BURNER
MAXIMUM 6”
AIR GAP
* ALL PIPING MATERIALS TO BE | FIGURE 1. |
SUPPLIED BY CUSTOMERS. |
7