Kenmore 116.29914, 116.29915 manual Removing Clogs, Dirt Sensor Dirt

DIRT SENSOR

The DIRT SENSOR DIRT

light system is mount- SENsoR...._.

ed on the PowerMate nozzle near the reset button. It consists of a series of two red lights and two green lights..

The lights give you an indicationof the amount of dirt particles that are passing through the sensor on its way to the dust bag..

INITIAL START UP

When the PowerMate is first started, the fol-

lowing light sequence occurs in a two-second time frame:

IoTwo reds come on.

2.Two greens are on and wi]l remain on until the PowerMate nozzle is placed in use_ NOTE: if the nozzle is on a surface that has dirt on it, dirt will be picked up by the vacuum cleaner and the red lights might slay on

IN OPERATION

When the PowerMate is being moved back and forth on the floor, the lightswill change

from one configuration to another as dirt is being vacuumed..As long as the red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning.

When the green lights stay on as the PowerMate is moved back and forth over an

area, the sensor is not seeing enough dirt to warrant further cleaning of that area.

NOTE: Dirt sensor lights DO NOT function in the FLOOR setting

	REMOVING			CLOGS
The vacuum cleaner creates suction that
picks up dirt.. Rapidly moving air carries		the		,i'f/_._.'_._
dirt to the dust bag through the airflow pas-				//).,_
sages. The dust bag lets the air pass			,/_._/'
through, while it traps the dirt_		////
For best cleaning	results, keep the airflow ,,,_>_y			t
passage openr Check the starred areas		..,_'._"		[,
occasiofoFclogs,Turnoffand.ally		#/		li
unplug vacuum cleaner from outlet ..___/
before checking	__//

I

Motor

15