CANISTER
I,, Open the canister hood.
2, Check to see that the dust bag is properly installed See BAG CHANGING for instructions
3, Check to see that the motor safety filter is properly installed, See MOTOR SAFETY FILTER CHANGING for instructions,
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool storage cover to come off when opened further than needed, Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall
ii | ill | i | i |
kCAUTION
Never open canister hood with the tool storage cover open, This will help to prevent damage from occurring to the canister hood and/or tool storage cover°
This canister is equipped with an
To Install:
Open the Pet PowerMate storage cover Insert the Pet PowerMate, press down into place, and close the lid securely,
To Remove:
Open the storage cover, Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and
ATTACHMENT USE TABLE)_
HOSE
1.Line up the hose latch tab and notch in canister hood and insert hose
into canister until it | ,.,o,. | )J | |
snaps into place | |||
|
|
To remove: Do not open hood before removing hose, With hood closed, depress hose latch tab and pull upward on hose,
2. Insert handle into wand until lock button
snaps in place, Be sure hose is not twisted
To remove: Press handle quick release button and pull up on handle,
To store: Disconnect hose from wand and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed°
Pet PowerMate
Storage Cover._.