Kenmore 580. 72089 owner manual Insert the side curtain iTEM a into the upper

INSTALLATION

Pick a location which will allow you to blow the cold air into the area you want.. Windows used for installation must be strong enough to support the weight of the air conditioner. Good installation with

special attention to the proper position of the unit will lessen the chance that service wilt be needed.

When cooling more than one room, installation

locationis very important, To cool your rooms, cold air must be blown from the air conditioner in a

straight path.

HOW TO INSTALL

tf the air conditioner is blocked by a storm window frame, see step 19 on page 8 before beginning to install

DRemove the screws which fasten the cabinet at both sides and at the back. Save side screws. Discard back screws.

Upperguide

ITEME

L

_Open the window Mart{ a line on center of the window inner sill.

Carefully place the cabinet on the window inner sill and align the center of the cabinet front with the center tine marked in the window inner silt.

FIG. 3

_ Slide the unit out of the cabinet by gripping the base pan handle and pull forward while bracing the cabinet.

FIG. 4

:

_Windowsill

FIG. 7

_Pull the bottom window sash down behind the upper guide until they meet.

NOTE: Do not pull the window sash down so tightly that the movement of side curtain is restricted,,

Window sash Upper guide

Foam seal"

Side curtain

_Cut the FOAM SEAL (ITEM l) to fit the underside of the window sash. Peel off the backing and attach the FOAM SEAL as shown in Fig 5,

FIG. 5

_ Insert the side curtain (iTEM A) into the upper

guide and lower guide of the air conditioner,,Fasten the curtains to the unit with screws (ITEM E)

_ Loosety assemble the sill supports using the

parts in FIG. 9.

,.ooo,	o. oo
"_	ITEMg
f/- '_--u	'" _TEMD
ITEMC	FIG. 9