On-Q/Legrand 1307877 owner manual Data in from ISP Data/Power

Page 11

4.In the structured wiring enclosure (see Figure 10) the Cat 5e from the WAP 802.11g can be terminated with an RJ45 plug which is then connected directly to the output of the Power over Cat 5e Inserter Module (P/N 36488-01).

Figure 10

Data in from ISP

Data/Power

 

 

out to WAP

Router/

 

 

Switch

 

 

Cat 5e

Power Over

Cat5e Inserter

patch cable

Module

5.A supplied Cat 5e patch cable is then connected from the input RJ-45 jack of the Power over Cat 5e Inserter Module to one of the LAN ports on the On-Q or third party Router, or directly to a Broadband Modem.

6.The Power over Cat 5e Inserter Module is powered with a 24 Volt DC power supply which needs to be plugged in to an AC source.

7.When the 24 VDC Power Supply is plugged in to an active AC Source, verify that the Power LED is lit on the Power Inserter.

8.Next, verify that the Power LED is lit on the WAP.

9.If you connected to an active network, verify that the Network Activity LED is lit on the network access device and on the WAP.

10.Then, verify the Wireless LED is lit on the WAP.

301 Fulling Mill Road, Suite G

©Copyright 2005 by On-Q/Legrand, Inc All Rights Reserved.

Middletown, PA 17057

www.onqlegrand.com

(800)-321-2343

 

Page 7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Wireless Access Point Declaration of Conformity R&TTE directive 1999/5/EC Federal Communications Commission StatementCanadian Department of Communications FCC Radio Frequency Exposure Caution StatementPage Table of Contents Data Rate Open Area Closed Area IntroductionComponents Included FeaturesReplacement Parts II. Product OverviewConnection Area Detailed Description WAP Assembly Status Indications P/N 364891-01 shownStatus Indicators Detailed Description WAP 802.11g Reset Button AccessPage Rough-in steps III. InstallationTrim-out steps Data in from ISP Data/Power IV. Configuration Steps Double-clickNetwork and Dial-Up Connections Select Control PanelIs not applicable for Windows 98SE or ME Logging on to the WAP Wireless Security Setup Page Page Configuring the WAP 802.11g to work with a Router Allowing Client Access with MAC Addresses Is not applicable for Windows 98SE or ME Page Login Password Change Firmware UpgradesWAP 802.11g Assembly Removal VI. TroubleshootingRestoring Factory Defaults Page Page Cannot configure the WAP 802.11g over the network BSS VII. GlossaryAnsi AsciiDNS CPEDhcp DMZFTP DSLDsss ESSISP IcmpIeee IsdnOSI MTUNAT NICPPP PcmciaPing POESmtp ROMRTS USB TCPTCP/IP UDPWlan WANWAP WEP

1307877 specifications

The On-Q/Legrand 1307877 is a versatile and innovative multimedia wall plate designed to streamline home theater and audio/video (AV) setups. As part of Legrand’s On-Q product line, this wall plate offers a blend of functionality, aesthetics, and high-performance features that cater to the modern smart home environment.

One of the standout features of the 1307877 is its ability to support a variety of connections for audio and video signals. It includes multiple input options, such as HDMI, RCA, and speaker terminals, allowing users to connect various devices, from Blu-ray players to game consoles and streaming devices. This versatility ensures that users can enjoy high-definition video and high-fidelity audio through a single wall plate, reducing clutter and enhancing the overall aesthetic of the room.

The technology behind the On-Q/Legrand 1307877 is designed to optimize signal quality and reduce interference. The HDMI port supports 4K resolution and is capable of carrying audio signals as well, ensuring that users receive the best possible picture and sound quality from their devices. The wall plate is structured with high-quality materials that are not only durable but also designed to minimize signal degradation.

Another important characteristic of this wall plate is its ease of installation. The On-Q/Legrand 1307877 is built to fit into standard-sized electrical boxes, making it user-friendly for both professional installers and DIY enthusiasts. The included mounting hardware ensures a straightforward setup process, and the clean design blends seamlessly with home decor, providing a polished and professional look.

In addition to functionality, the 1307877 is designed with future-proofing in mind. As technology continues to advance, having a multimedia wall plate that can accommodate various connections and formats ensures that users can adapt their home entertainment systems without needing extensive renovations.

Overall, the On-Q/Legrand 1307877 multimedia wall plate stands out as a practical solution for modern AV needs, providing a combination of high-tech features, user-friendly installation, and aesthetic appeal. Its commitment to quality and performance makes it an excellent choice for anyone looking to enhance their home entertainment setup.
Top Page Image Contents