On-Q/Legrand 1307877 Connection Area Detailed Description, Status Indicators Detailed Description

Page 7

2.Connection Area Detailed Description

INPUT – This RJ-45 connector is where the Cat 5e cable from the Power Over Cat 5e Inserter Module in the On-Q Enclosure plugs in. There is an Extractor Module in the WAP Assembly that breaks out the required DC power from the data on the input Cat 5e cable connection.

NOTE: Notice in Figure 2 that there is also a small factory installed jumper cable that supplies the required DC power and data to the WAP assembly.

3.WAP Assembly Status Indications (P/N 364891-01 shown)

Figure 3 shows the WAP 802.11g Assembly status indicators, which are visible when the WAP cover is properly installed:

Data

Figure 3

Wireless

Power

4.Status Indicators Detailed Description:

Data Indicator

ON (Blue) – The device is connected to a data network.

OFF – The device is powered off or not connected to a data network.

Wireless Indicator

ON (Blue) – The device is on and operating normally. OFF – The device is powered off.

Blinking (Blue) – The device is transmitting or receiving data.

Power Indicator

ON (Blue) - The device is powered on and operating normally. OFF – The device is powered off or performing a boot sequence. Blinking (Blue) Firmware upgrade failed.

5.WAP 802.11g Reset Button Access

Figure 4 shows the WAP 802.11g with the cover removed to gain access to the Reset Button. As shown, there is a tab that when pushed in the direction shown will activate the Reset Button. Pushing and holding this tab for five seconds or more will return the unit to

301 Fulling Mill Road, Suite G

©Copyright 2005 by On-Q/Legrand, Inc All Rights Reserved.

Middletown, PA 17057

www.onqlegrand.com

(800)-321-2343

 

Page 3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Wireless Access Point Declaration of Conformity R&TTE directive 1999/5/EC Federal Communications Commission StatementCanadian Department of Communications FCC Radio Frequency Exposure Caution StatementPage Table of Contents Data Rate Open Area Closed Area IntroductionComponents Included FeaturesReplacement Parts II. Product OverviewConnection Area Detailed Description WAP Assembly Status Indications P/N 364891-01 shownStatus Indicators Detailed Description WAP 802.11g Reset Button AccessPage Rough-in steps III. InstallationTrim-out steps Data in from ISP Data/Power IV. Configuration Steps Double-clickNetwork and Dial-Up Connections Select Control PanelIs not applicable for Windows 98SE or ME Logging on to the WAP Wireless Security Setup Page Page Configuring the WAP 802.11g to work with a Router Allowing Client Access with MAC Addresses Is not applicable for Windows 98SE or ME Page Login Password Change Firmware UpgradesWAP 802.11g Assembly Removal VI. TroubleshootingRestoring Factory Defaults Page Page Cannot configure the WAP 802.11g over the network BSS VII. GlossaryAnsi AsciiDNS CPEDhcp DMZFTP DSLDsss ESSISP IcmpIeee IsdnOSI MTUNAT NICPPP PcmciaPing POERTS ROMSmtp USB TCPTCP/IP UDPWlan WANWAP WEP

1307877 specifications

The On-Q/Legrand 1307877 is a versatile and innovative multimedia wall plate designed to streamline home theater and audio/video (AV) setups. As part of Legrand’s On-Q product line, this wall plate offers a blend of functionality, aesthetics, and high-performance features that cater to the modern smart home environment.

One of the standout features of the 1307877 is its ability to support a variety of connections for audio and video signals. It includes multiple input options, such as HDMI, RCA, and speaker terminals, allowing users to connect various devices, from Blu-ray players to game consoles and streaming devices. This versatility ensures that users can enjoy high-definition video and high-fidelity audio through a single wall plate, reducing clutter and enhancing the overall aesthetic of the room.

The technology behind the On-Q/Legrand 1307877 is designed to optimize signal quality and reduce interference. The HDMI port supports 4K resolution and is capable of carrying audio signals as well, ensuring that users receive the best possible picture and sound quality from their devices. The wall plate is structured with high-quality materials that are not only durable but also designed to minimize signal degradation.

Another important characteristic of this wall plate is its ease of installation. The On-Q/Legrand 1307877 is built to fit into standard-sized electrical boxes, making it user-friendly for both professional installers and DIY enthusiasts. The included mounting hardware ensures a straightforward setup process, and the clean design blends seamlessly with home decor, providing a polished and professional look.

In addition to functionality, the 1307877 is designed with future-proofing in mind. As technology continues to advance, having a multimedia wall plate that can accommodate various connections and formats ensures that users can adapt their home entertainment systems without needing extensive renovations.

Overall, the On-Q/Legrand 1307877 multimedia wall plate stands out as a practical solution for modern AV needs, providing a combination of high-tech features, user-friendly installation, and aesthetic appeal. Its commitment to quality and performance makes it an excellent choice for anyone looking to enhance their home entertainment setup.
Top Page Image Contents