On-Q/Legrand 1307877 owner manual Restoring Factory Defaults

Page 25

3.Restoring Factory Defaults

If you need to reset the WAP 802.11g to factory default settings, there are two methods that can be used. You can login to the device and click on the Restore button at the bottom of each screen, or, once the cover has been removed, you can simply push and hold the Reset tab in the direction shown for at least 5 seconds (see Figure 32). This action will restore the WAP 802.11g to factory defaults as follows:

Factory SSID

Responds to broadcast SSID requests

Channel 1 operation

Mixed Operation Mode

Automatic Transmit Rate

Long Preamble

Open System Authentication Method

No Encryption

Accept requests from any stations

Default IP Address (192.168.1.1)

Figure 32

NOTE: Prior to performing Step 4 below, remove AC power from the Power Inserter in the On-Q Enclosure.

4.WAP 802.11g Cabling Verification

Once the WAP 802.11g Assembly has been removed from the 3 gang box as shown in Figure 31, look at the back of the assembly to insure the Cat 5e cable from the enclosure is properly terminated (see Figure 33) and plugged into the Input jack as shown in Figure 34. Also insure the rest of the factory cabling is plugged in as shown. Then replace the assembly back in the 3 gang box and replace the cover.

301 Fulling Mill Road, Suite G

©Copyright 2005 by On-Q/Legrand, Inc All Rights Reserved.

Middletown, PA 17057

www.onqlegrand.com

(800)-321-2343

 

Page 21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Wireless Access Point Canadian Department of Communications Federal Communications Commission StatementFCC Radio Frequency Exposure Caution Statement Declaration of Conformity R&TTE directive 1999/5/ECPage Table of Contents Data Rate Open Area Closed Area IntroductionReplacement Parts FeaturesII. Product Overview Components IncludedStatus Indicators Detailed Description WAP Assembly Status Indications P/N 364891-01 shownWAP 802.11g Reset Button Access Connection Area Detailed DescriptionPage Rough-in steps III. InstallationTrim-out steps Data in from ISP Data/Power IV. Configuration Steps Double-clickNetwork and Dial-Up Connections Select Control PanelIs not applicable for Windows 98SE or ME Logging on to the WAP Wireless Security Setup Page Page Configuring the WAP 802.11g to work with a Router Allowing Client Access with MAC Addresses Is not applicable for Windows 98SE or ME Page Login Password Change Firmware UpgradesWAP 802.11g Assembly Removal VI. TroubleshootingRestoring Factory Defaults Page Page Cannot configure the WAP 802.11g over the network Ansi VII. GlossaryAscii BSSDhcp CPEDMZ DNSDsss DSLESS FTPIeee IcmpIsdn ISPNAT MTUNIC OSIPing PcmciaPOE PPPRTS ROMSmtp TCP/IP TCPUDP USBWAP WANWEP Wlan

1307877 specifications

The On-Q/Legrand 1307877 is a versatile and innovative multimedia wall plate designed to streamline home theater and audio/video (AV) setups. As part of Legrand’s On-Q product line, this wall plate offers a blend of functionality, aesthetics, and high-performance features that cater to the modern smart home environment.

One of the standout features of the 1307877 is its ability to support a variety of connections for audio and video signals. It includes multiple input options, such as HDMI, RCA, and speaker terminals, allowing users to connect various devices, from Blu-ray players to game consoles and streaming devices. This versatility ensures that users can enjoy high-definition video and high-fidelity audio through a single wall plate, reducing clutter and enhancing the overall aesthetic of the room.

The technology behind the On-Q/Legrand 1307877 is designed to optimize signal quality and reduce interference. The HDMI port supports 4K resolution and is capable of carrying audio signals as well, ensuring that users receive the best possible picture and sound quality from their devices. The wall plate is structured with high-quality materials that are not only durable but also designed to minimize signal degradation.

Another important characteristic of this wall plate is its ease of installation. The On-Q/Legrand 1307877 is built to fit into standard-sized electrical boxes, making it user-friendly for both professional installers and DIY enthusiasts. The included mounting hardware ensures a straightforward setup process, and the clean design blends seamlessly with home decor, providing a polished and professional look.

In addition to functionality, the 1307877 is designed with future-proofing in mind. As technology continues to advance, having a multimedia wall plate that can accommodate various connections and formats ensures that users can adapt their home entertainment systems without needing extensive renovations.

Overall, the On-Q/Legrand 1307877 multimedia wall plate stands out as a practical solution for modern AV needs, providing a combination of high-tech features, user-friendly installation, and aesthetic appeal. Its commitment to quality and performance makes it an excellent choice for anyone looking to enhance their home entertainment setup.
Top Page Image Contents