Dixi XWA11V manual Parameter MAP, Range

dIXEL
 Operating Instructions XWA11V 1598003200

13. PARAMETER MAP

		COOLER		**
		VALUES		FREEZER		RANGE
LABEL	DESCRIPTION	DEFAULT		VALUES	LEVEL
						[-12,0°C <> 12,0°C] [-
ot	Thermostat probe calibration	0	0		Pr2	21°F <> 21°F]
CF	Temp measurement unit	F		F	Pr2	°C - °F
rES	Resolution (only °C)	in		in	Pr2	dE - in
UT	Display update	60	60		Pr2	0 <> 255 (sec)
OnF	Off function enabling	Y		Y	Pr2	N - Y
						°C[ ALL <> 150,0°]
ALU	High Temp alarm setting **	50	30		Pr1	°F[ ALL <> 302°]
						°C[ -50.0° <> ALU]
ALL	Low Temp alarm setting **	25	-20		Pr1	°F[-58 <> ALU]
						[0,1°C <>25,5°C]
AFH	Temp alarm differential	2	2		Pr2	[1°F <> 45°F]
ALd	Temp alarm delay	30	30		Pr1	0 <> 255 (min.)
dAo	Delay of Temp alarm at start-up	1.5	1.5		Pr2	0 <> 24.0 (Hrs / 10 min.)
EdA	Alarm delay at the end of defrost	30	30		Pr2	0 <> 255 (min.)
	Delay of Temp alarm after closing
dot	the door	15	15		Pr2	0 <> 255 (min.)
LHt	Light timer	15	15		Pr1	0 <> 255 (min.)
doA	Open door alarm delay	15	15		Pr1	0 <> 255 (min.)
OA1	First relay configuration	Alr		ALr	Pr2	ALr - LHt - OnF
oA2	Second relay configuration	LHt		LHt	Pr2	ALr - LHt - OnF
AOP	Alarm relay polarity	CL		CL	Pr2	OP - CL
i1P	Digital input 1 polarity	op		oP	Pr2	OP - CL
i1L	Door switch to turn light ON	y		y	Pr2	n - Y
i1F	Digital input 1 operating mode	dor		dor	Pr2	EAL - dor- dFr - LHt
i2P	Digital input 2 polarity	CL		cL	Pr2	OP - CL
i2F	Digital input 2 operating mode	Pan		PAn	Pr2	EAL - Pan - dFr - LHt
	Time interval/delay for digital
did	input alarm	0	0		Pr2	0 <> 255 (min.)
tbA	Alarm relay disabling	n		n	Pr2	n - Y
PbC	Kind of probe	ntc		ntc	Pr2	PtC - ntC
dP1	Real T° Probe 1				Pr2	(probe value)
rEL	FW release				Pr2	read only
Ptb	Parameter map				Pr2	read only

Weiss Instruments, Inc. 905 Waverly Ave. Holtsville, NY 11742 631-207-1200 www.weissinstruments.com 7