INSTALLATION OF OPTIONAL BLOWER ASSEMBLY
(MODEL MA CVF714)
1.Remove Blower Assembly from carton. Re- move all protective packaging applied to Blower Assembly for shipment.
2.Check all items for any shipping damage. If damaged, promptly inform dealer where you purchased the Blower Assembly.
3.From the rear of the Fire Box, align the four (4) notches in the Blower Assembly with (4) holes in the rear of the Fire Box. This will ensure the centering of the Blower Assembly on the Fire Box.
4.After determining the area of placement for the Blower Assembly, attach the Blower Assembly to the Fire Box using the four (4) #8 x 1/2"
come damaged while being installed.
FOUR (4) HOLES FOR MOUNTING BLOWER ASSEMBLY
FOUR (4) NOTCHES IN
BLOWER ASSEMBLY FOR
MOUNTING
FIRE BOX | BLOWER ASSEMBLY | |
(MA CVF714) | ||
|
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dan- gerous operation.
Verify proper operation after servicing.
If any of the original wire as supplied with the appliance must be replaced, it must be replaced with a wire of at least a 105€ temperature rating.
13