Whistler WIC-2409C user manual Turn off the camera and monitor when not is use

Page 12
•Turn off the camera and monitor when not is use.

Do not expose the monitor or grip to dripping or splashing liquids.

Turn off the camera and monitor when not is use.

Use only the AC adaptor and cable supplied with the unit.

Remove the batteries when cleaning the unit.

Remove the batteries before storing the unit for a long time.

When necessary, REPLACE ALL FOUR BATTERIES in this unit with new ones.

Use only the size and type of battery specified.

Be sure to install the batteries with the correct polarity as indicated on the battery compartment.

Properly dispose of the batteries. Exposure to high temperatures can cause the batteries to explode. Do not dispose of batteries in a fire. When stored, place tape over the terminals to prevent direct contact with other objects.

Some countries have regulations concerning battery disposal. Please follow all applicable regulations.

- 1 0 -

Image 12
Contents Wireless Inspection Camera with Color LCD Monitor Model No. WIC-2409CWELCOME Enjoy your Whistler Inspection Camera Sincerely The Whistler Group, IncAccessory Collar Handheld GripAdapter Cable COMPONENTS / CONTROLS Finger tighten the knurled knob Accessory Installed and connectorAlign the slot properlyThe monitor can be used while charging Page Slide the ON/OFF switch to the ON position. The power indicator will illuminate green and a picture will appear on the monitor when the handheld unit is turned on. Adjust the brightness, contrast, and orientation. Adjust the camera LED intensity for a better image 640 x 480 NTSC 8V-36VDC 490mA Turn off the camera and monitor when not is use WARRANTY INFORMATION ACCESSORIES Accessory PackWIC-100P ORDER#FCC ID TW5GB8802-GB8803