Whistler WIC-2409C user manual The monitor can be used while charging

Page 8

Plug the adapter cable into the power socket on the monitor, plug the other end of the adapter cable into the end of the power adapter. Plug the power adapter into a 110v AC outlet.

The built-in Li-battery will charge after the adapter is plugged in.

The red indicator light will illuminate during charging and will turn off after charging is complete.

The monitor can be used while charging.

- 6 -

Image 8

Contents Wireless Inspection Camera with Color LCD Monitor Model No. WIC-2409CWELCOME Enjoy your Whistler Inspection Camera Sincerely The Whistler Group, IncAdapter Cable Accessory CollarHandheld Grip COMPONENTS / CONTROLS Finger tighten the knurled knob Accessory Installed and connectorAlign the slot properlyThe monitor can be used while charging Page Slide the ON/OFF switch to the ON position. The power indicator will illuminate green and a picture will appear on the monitor when the handheld unit is turned on. Adjust the brightness, contrast, and orientation. Adjust the camera LED intensity for a better image 640 x 480 NTSC 8V-36VDC 490mA Turn off the camera and monitor when not is use WARRANTY INFORMATION ACCESSORIES Accessory PackWIC-100P ORDER#FCC ID TW5GB8802-GB8803