ADT Security Services EZ manual Bypassing Faulted Zones, Press the Bypass button

Page 7

BYPASSING FAULTED ZONES

If you are trying to arm with a faulted zone or zones, the green READY light will be blinking out the number of the faulted zones. If you cannot repair the zone(s), they may be temporarily removed from the system, or bypassed, using the fol- lowing procedure:

1	Press the BYPASS button.

TBL

The EZ Touchpad will beep and the yellow Trouble indicator will light ON STEADY.

2	Press either the STAY or AWAY button.

3	If arming AWAY, open the door and exit.

4	Lock the deadbolt to arm the system with the faulted zones bypassed.

Warning: Bypassed zones are unprotected. If a faulted zone cannot be secured, have the system checked as soon as possible.

7

Image 7

Contents ADT Please read it through and retain it for IntroductionTable of Contents TBL EZ Touchpad IndicatorsEmergency Buttons EZ Touchpad ControlsPress the Away button Arming When LeavingOpen the door and exit If arming AWAY, open the door and exit Bypassing Faulted ZonesPress the Bypass button Press either the Stay or Away buttonPress the Stay button Arming When Staying HomeArming and Leaving with Others Staying Exiting with the System Already Armed Indicate the system has armed Unlock the deadbolt from the inside. System will disarmEmergency Buttons Disarming when home Armed Stay Disarming when returning homeDisarming the System If an alarm occurs while you are at home Silencing AN AlarmIf an alarm occurs while you are away Fire Fire ProtectionImportant! Read Carefully Would You Like More Safety Information?Preparing a Fire Escape Plan Family RehearsalReady System Trouble Error CodesDetector Supervisory Failure Zone List Adding additional IFOBs to your system Enrolling a NEW EZ IfobRemoving IFOBs from the system Lost Key Mode Lost KEY ModeFederal Communications Commission FCC Part 68 Statement Page Page Terms and Conditions Applying to Sale of Equipment Limited WarrantyALL Rights Reserved Following Statement is Required by the FCC