ADT Security Services EZ manual Federal Communications Commission FCC Part 68 Statement

Page 22

FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 STATEMENT

This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this infor- mation must be provided to the telephone company.

This equipment uses the following jacks: An RJ31 X is used to connect this equipment to the telephone network.

The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive IRENs on the telephone line may result in the devices not ringing in response to an incoming call, in most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary dis- continuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.

If trouble is experienced with this equipment, please contact the manufacturer for repair and warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the problem is resolved.

There are no user serviceable components in this product, and all necessary repairs must be made by the manufacturer. Other repair methods may invalidate the FCC registration on this product.

This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to state tariffs.

This equipment is hearing-aid compatible.

When programming or making test calls to an emergency number, briefly explain to the dispatcher the reason for the call. Per- form such activities in the off-peak hours; such as early morning or late evening.

22

Image 22
Contents ADT Introduction Please read it through and retain it forTable of Contents EZ Touchpad Indicators TBLEZ Touchpad Controls Emergency ButtonsPress the Away button Arming When LeavingOpen the door and exit Press either the Stay or Away button Bypassing Faulted ZonesPress the Bypass button If arming AWAY, open the door and exitArming When Staying Home Press the Stay buttonArming and Leaving with Others Staying Exiting with the System Already Armed Unlock the deadbolt from the inside. System will disarm Indicate the system has armedEmergency Buttons Disarming when home Armed Stay Disarming when returning homeDisarming the System If an alarm occurs while you are at home Silencing AN AlarmIf an alarm occurs while you are away Fire Protection FireFamily Rehearsal Would You Like More Safety Information?Preparing a Fire Escape Plan Important! Read CarefullySystem Trouble Error Codes ReadyDetector Supervisory Failure Zone List Adding additional IFOBs to your system Enrolling a NEW EZ IfobRemoving IFOBs from the system Lost KEY Mode Lost Key ModeFederal Communications Commission FCC Part 68 Statement Page Page Limited Warranty Terms and Conditions Applying to Sale of EquipmentALL Rights Reserved Following Statement is Required by the FCC