Specifications, Installation | Therma-Stor Products Group UA-135H

FOR HVAC INSTALLER ONLY

5.(DEH 2000) DIGITAL CONTROL Installation Instructions

5.1Specifications

Model: 4024539

Electrical: 24 VAC

Humidity Range: 20 – 90%

RH Humidity Accuracy: +/- 4%

Output: 3 Amps 24 VAC

5.2Installation

This control panel must be installed in the conditioned space and in accordance with all applicable codes and standards. Follow the instructions below when installing and setting this control.

5.2A Install Instructions

1.Separate the front panel from the back panel by depressing the tongue located in the bottom of the control.

2.Gently disconnect the quick connector on the back panel

3.Remove the battery from the back panel by sliding it to the left and out from it’s retaining clip. To mount in the black battery holder on the front panel, insert it from the top, gently pressing downward until it snaps into place and is held under the top clip of the holder. The + engraved on the battery should be visible.

4.Line the back panel up against the wall or flat surface onto which it is to be mounted and drill in the appropriate mounting holes

5.Insert the screws so they extend approximately 1/8" from the wall or flat surface.

6.Align the back panel against these screws, pushing it forward,

allowing it to slide downward to lock into position.

7.Make the electrical connections to the terminals on theback panel as shown in the wiring diagram.

8.Seal the hole around the wires to prevent air movement.

9.Reconnect the quick connector onto the back panel.

10.Reassemble the front to the back panel. Connect at the top first, then at the bottom.

5.2B Wiring

WARNING

Warning: Do not allow the yellow lead from the Ultra-Aire to contact the red lead or orange lead from the Ultra-Aire or damage to the transformer will result.

The installer must supply the wiring between the Ultra-Aire and the control panel. Be sure to safely route the control wires to prevent damage during installation. Be careful not to cross wires when connecting the Ultra-Aire and the remote control panel or damage to the transformer may result.

IMPORTANT

The remote controls of the Ultra-Aire are powered by a low voltage circuit (24 VAC) and must NEVER contact or be connected to a high voltage circuit.

Some of the control wires may not be used with certain control panels and should be left safely disconnected with wire nuts taped onto the stripped ends. Be sure to consult the electrical schematic in this manual

before making the control connections.

11	Ultra-Aire 135H Installer’s & Owner’s Manual

UA-135H specifications

The Therma-Stor Products Group UA-135H is a cutting-edge unit designed for efficient humidity control in various settings, especially in residential and commercial environments. This product stands out due to its robust construction and innovative technology, making it a preferred choice for those looking to maintain optimal air quality.

One of the key features of the UA-135H is its high-capacity dehumidification ability. With a removal capacity of up to 135 pints per day, this unit is ideal for tackling dampness in basements, crawl spaces, and larger living areas. This impressive capacity allows for effective moisture management, which is crucial in preventing mold growth and maintaining a healthy indoor environment.

Technologically advanced, the UA-135H incorporates a powerful compressor and a high-efficiency fan that ensures rapid and uniform air circulation. This design not only aids in faster moisture extraction but also enhances the overall energy efficiency of the unit. The built-in hygrometer monitors the humidity levels in real-time, allowing for automatic adjustments to optimize performance and reduce energy consumption.

Ease of use is another highlight of the UA-135H. The unit features a user-friendly digital control panel, enabling users to set their desired humidity levels with precision. Additionally, the product is equipped with a continuous drainage option, allowing for hassle-free operation without the need for frequent emptying of the water tank.

Durability is a hallmark of the UA-135H, featuring a corrosion-resistant housing that ensures longevity even in challenging environments. The unit operates quietly, providing effective humidity control without disturbing the peace of your home or workplace.

Energy efficiency ratings further enhance the appeal of the UA-135H. It not only meets but often exceeds industry standards, translating to cost savings on energy bills. The unit is also designed for easy maintenance, with accessible filters that can be cleaned or replaced with minimal effort, ensuring optimal performance over time.

In conclusion, the Therma-Stor Products Group UA-135H is a reliable and efficient solution for humidity control. Its combination of high-capacity dehumidification, advanced technology, user-friendly features, and durable design makes it an excellent investment for maintaining a healthy indoor environment. Whether for residential or commercial use, the UA-135H promises effective performance and long-lasting reliability.