White Rodgers UP400 Adjust actual temperature display, Change faceplate color

Page 16

4.12 Adjust actual temperature display

Your thermostat was accurately calibrated at the factory. However,

if you would like the displayed temperature to read higher or lower than the actual temperature, you can adjust the displayed temperature

by +/- 4 degrees.

To adjust the actual temperature display:

1.Press the MENU icon, then press MORE OPTIONS.

2.Continue to press the MORE OPTIONS icon until you reach option #10.

3.Use the to adjust the displayed temperature; from 4:LO to 4:HI.

4.Press DONE.

4.13 Change faceplate color

You can customize the look of the thermostat by changing the faceplate color.

1.Remove the white faceplate. Insert a small screwdriver into each of the 4 slots located on both sides of the thermostat, and pop up the white cover in all 4 spots.

2.Select a color from the inserts provided in the package.

3.Put the clear cover on a flat surface face down.

4.Fit the selected insert onto the 4 tabs located on the inside of the clear cover. Be sure the insert is properly aligned. Do not bend the insert excessively.

5.Flatten/spread the insert gently with your fingers into the clear cover.

The insert should rest securely attached to the tabs, even if you turn the cover upside-down.

6.Snap the faceplate (with the insert in it) onto the thermostat. Make sure the cover tabs align with the installation slots in the thermostat.

Thermostat

Installation

Slots

Slots

2

Insert

1

Tabs

Clear cover

28

29

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Installation Instructions & User Guide White-Rodgers.comTable of Contents Check package contents Turn off power to your heating and cooling systemPart 1 Before Getting Started Answer questions about source of heating in your homePart 2 Remove Old Thermostat and Install New Thermostat Expose wires connected to old thermostatLabel and disconnect the wires Wires leading from the wall to aTerminal on the thermostat These don’t have to be labeledTerminal is wired into the wall Identified by this letter… This letterMatch and connect wires Install new thermostat’s wallplatePart 3 Quick setup Install batteriesSet fan and system mode Snap thermostat to the wallplateSelect options OFFCongratulations Part 4 Additional thermostat features Customize the pre-programmed scheduleSet favorite temperatures Cancel the Favorite by pressing the RUN Schedule iconCancel the override by pressing the RUN Schedule icon Set temporary hold atUse the to raise or lower the setting Bypass the scheduleSet vacation hold Change batteriesSet change filter reminder Set keypad lockoutSecond and third digits of the PIN Enable auto changeover To enable Humidifier Pad ReminderAdjust actual temperature display Change faceplate colorPart 5 Troubleshooting Guide Troubleshooting GuideAppendix Heat Pump Identification

UP400 specifications

The White Rodgers UP400 is an advanced programmable thermostat designed to enhance energy efficiency and comfort in residential heating and cooling systems. It combines ease of use with sophisticated technology, making it an excellent choice for homeowners looking to optimize their environmental control.

One of the standout features of the UP400 is its user-friendly interface. The large, backlit display provides clear visibility, allowing users to read and adjust settings with ease, even in dim lighting. The intuitive menu navigation simplifies programming, making it accessible for users of all skill levels.

The UP400 is equipped with four programmable periods per day, allowing users to customize temperature settings according to their daily schedules. This feature helps maximize energy savings by reducing heating or cooling when the home is unoccupied. Users can tailor the settings for weekdays and weekends, ensuring comfort while minimizing energy costs.

The thermostat is designed with advanced technologies to improve accuracy and reliability. Its built-in temperature sensors provide precise readings, ensuring that the HVAC system operates within optimal ranges. This technology contributes to enhanced comfort and more efficient energy use, as the system can respond quickly to any fluctuations in indoor temperature.

Another key characteristic of the White Rodgers UP400 is its compatibility with a wide range of heating and cooling systems, including gas, electric, heat pump, and multi-stage systems. This versatility makes it a suitable option for various residential setups, providing homeowners with flexibility when updating or replacing their existing systems.

The UP400 also features adaptive recovery technology, which intelligently determines when to start heating or cooling to reach the desired temperature by the scheduled time. This eliminates the guesswork associated with traditional thermostats and further enhances energy efficiency.

Additionally, the UP400 supports fan-only operation, allowing users to circulate air without activating the heating or cooling systems. This feature can help improve air quality and temperature distribution within the home, contributing to a more comfortable living environment.

In summary, the White Rodgers UP400 is a multifunctional programmable thermostat that offers significant benefits in terms of efficiency, accuracy, and ease of use. With its programmable features, advanced temperature sensors, and broad compatibility, it is a top choice for homeowners aiming to enhance their comfort while controlling energy costs.
Top Page Image Contents