Continued
English
Turning On the Power and Selecting the Sources
When you press the play button for a particular source (FM/
Adjusting the Volume
You can adjust the volume level only while the unit is turned on.
AM, CD 6, TAPE 23, and AUX), the unit turns on. (For
The unit starts playing the source if it is ready — COMPU PLAY CONTROL.
To listen to the FM/AM (MW/LW) broadcasts, press FM/
AM. (See page 14.)
Turn VOLUME clockwise to increase the volume or counterclockwise to decrease it.
VOLUME
+
–
To play back CDs, press CD 6. (See pages 15 – 18.) To play back tapes, press TAPE 23. (See page 19.)
To select the external equipment as the source, press AUX.
When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.
CD | TAPE |
FM /AM | AUX |
To turn on the unit without playing, press | STANDBY |
(standby/on) so that the STANDBY lamp goes off. |
|
(For
To turn off the unit (on standby), press | STANDBY |
(standby/on) again so that the STANDBY lamp lights up.
(For
A little power is always consumed even while the unit is on standby.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock is reset to “0:00” right away, while the tuner preset stations (see page 14) will be erased in a few days.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones.
DO NOT turn off (on standby) the unit with the 
volume set to an extremely high level; otherwise, a sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source next time. REMEMBER you cannot adjust the volume level while the unit is on standby.
– 12 –
