White Rodgers F95-391 Press Time FWD or Time Back, Adjustable Humidity Display

Page 27

2.Press TIME FWD or TIME BACK

to change the time to your requirements.

3.Press PROGRAM RUN to return to the normal operating mode. If the

temperature still does not rise, it will continue to call for heat. This normally indicates the heating system is not working correctly. You may wish to consult your furnace manufacturer or service person. The display will

indicate CHECK STAT if one of the following occurs.

• One of the buttons is stuck down or in. Check buttons, make sure nothing is pushing them in.

• The thermostat sensor is not functioning. If using a remote sensor, check connections, wiring and power.

• The humidity sensor is not function- ing. After checking the above, press

PROGRAMRUN to reset the display. If this does not clear the display, disconnect power for five

minutes. If these checks fail to solve the problem, the thermostat should be replaced.

Adjustable Humidity Display.

The room humidity display can be adjusted to read higher or lower by following the configuration menu and adjusting the humidity to a higher or lower value (up to 20% RH). The sensed humidity is calibrated at the factory. If you want to adjust it, refer

to the CONFIGURATIONsection (page 4, step 3).

Programmable Automatic Humidity Reduction.

This feature automatically lowers humidity when the outside temperature drops. This is to prevent the interior windows/walls from reaching the dew point where water condenses on surfaces. To achieve automatic

25

humidity reduction, the thermostat lowers the humidity when furnace cycles are long. When the furnace runs shorter cycles, it increases humidity.

For suggested settings see table below.

OFF

Factory default — no humidity

 

 

reduction.

 

 

 

 

 

LO

Well insulated homes requiring

 

 

little humidity reduction.

 

 

 

 

HI

Poorly insulated homes or homes

 

 

with a lot of condensation on

 

 

windows/walls.

 

 

 

 

 

If your window insulation is poor, you

 

need high humidity reduction. If your

 

window insulation is good, you need

 

low humidity reduction (factory

 

 

setting). Selection of

OFF

will cancel

this feature. To adjust this feature,

 

refer to the

CONFIGURATION

 

 

section (page 4, step 4).

 

 

Features

Page 26 Page 28
Image 27
Page 26 Page 28
Contents SeriesTM Easy, Menu-Driven Set-Up Programming Heat OrientationThermostat Buttons TimeDisplays Large Lighted LCD DisplayPrgm OFFIntroduction Introduction ConfigurationTo enter the menu, press ConfigurationOne shot option Selectable Energy Management Configuration Menu FeaturesAdjustable Temperature Display Recovery EMRCmft Adjustable Humidity Display RHProgrammable Dehumidification Optimal Comfort Mode Optm Programmable Automatic Humidity Reduction DRYOptm Dhum EVE Optional Remote TemperatureCool Fast SenseKeypad Lockout Menu Outdoor Temperature SenseRary Program Override TotalAllows only TempoMON ProgrammingManual Operation CoolProgram COPY, and allAgain to copy ButtonMON 78 F 25 C Day Personal Heat Program Schedule Day Personal Cool Program Schedule Program RUN FeaturesUser Programmable Vacation Time/ Temperature OperationAutomatic Heat/Cool Changeover HoldLockout Thermostat Startup Up After Power LossFlashing. Press Keypad LockoutShow either REM PAD TIME, REM Service Button MenuGram Compressor Short Cycle ProtectionSet Air Set Humidifier Maintenance ReminderChng Fltr Humidifier Maintenance IndicatorAir Filter Change-Out Indicator ServiceProgram SET Filter TimeTime Time BackProgrammable Automatic Humidity Reduction Adjustable Humidity DisplayTo the CONFIGURATIONsection page 4, step Press Time FWD or Time BackTemp Humidifier Control and MonitoringTime Back Time FWDOFF FAN on1F95-391 HEAT, OFF, COOL, or Auto is displayedChck PAD Chck PAD isHumd MX Occurred ContOwn to accept the change Heat pump thermostat? AuxWill TroubleshootingResetting Thermostat Symptom Possible Cause Corrective ActionRaise temperature above room temperature Ture below room temperatureButton to Cool and lower tempera Person can instruct you on how to test the Heat/Cool System for correct operation. If the system operatesCorrectly, replace the thermostat Symptom Possible Cause Corrective Action Troubleshooting Index Page Part no -6528B

F95-391 specifications

The White Rodgers F95-391 is a versatile and advanced thermostat designed for residential and light commercial applications, providing optimal temperature control and energy efficiency. Featuring a sleek design, the F95-391 integrates seamlessly into various home and business environments, ensuring both functionality and aesthetics are addressed.

One of the main features of the F95-391 is its ability to accommodate multiple heating and cooling systems. It supports up to four stages of heating and two stages of cooling, making it suitable for complex HVAC setups. This flexibility allows for precise temperature management, contributing to enhanced comfort and energy savings.

The F95-391 is equipped with a user-friendly interface that includes a large, easy-to-read display. Users can access current temperature readings, set their desired temperature, and manage programming functions effortlessly. The device also offers a variety of programming options, including 7-day programmable scheduling. This means users can customize heating and cooling settings according to their daily routines, helping to minimize energy use during unoccupied hours.

Advanced technologies are integrated into the White Rodgers F95-391, including adjustable temperature sensitivity and automatic recovery features. The adjustable temperature sensitivity allows users to fine-tune how quickly the system responds to temperature changes, promoting energy efficiency. The automatic recovery function ensures that the home reaches the desired temperature by the time scheduled programming begins, enhancing comfort without unnecessary energy consumption.

Another noteworthy characteristic is its compatibility with Wi-Fi, allowing remote access via smartphones and tablets. This connectivity feature enables users to monitor and adjust their thermostat settings from anywhere, making it convenient to manage home temperature on the go. By leveraging smart technology, homeowners can optimize their energy consumption even when they are not present.

The F95-391 also includes features such as a filter change reminder and HVAC system diagnostics. These tools help users maintain their heating and cooling systems effectively, reducing the risk of system failures and extending the lifespan of their equipment.

In summary, the White Rodgers F95-391 thermostat stands out for its programmability, advanced technologies, and user-friendly features. Ideal for those seeking an efficient and modern solution to temperature management, the F95-391 combines comfort with energy savings, making it a valuable addition to any space.
Top Page Image Contents