Heat & Glo LifeStyle AT-ZC manual Step Gas Pressure Requirements Wiring Fireplace

Page 15

Step 5

Gas Pressure

Requirements

Step 6

Wiring the

Fireplace

Pressure requirements for Heat-N-Glo gas appliances are shown in the table below.

Pressure

Natural Gas

Propane

 

 

 

Minimum

5.0 inches

11.0 inches

Inlet Pressure

w.c.

w.c.

 

 

 

Maximum Inlet

14.0 inches

14.0 inches

Gas Pressure

w.c.

w.c.

 

 

 

Manifold

3.5 inches

10.0 inches

Pressure

w.c.

w.c.

 

 

 

A one-eighth (1/8) inch (3 mm) N.P.T. plugged tapping is provided on the outlet side of the gas control for a test gauge connection to measure the manifold pressure. To measure inlet pressure, provisions must be made to attach a test gauge to a one-eighth (1/8) inch (3 mm) N.P.T. plugged tapping immediately upstream of the gas supply connection to the fireplace. On some models there may be a tap for the manifold and inlet pressure on the face of the valve. Use a small flat blade screwdriver to open the needle valve tap. Position a rubber hose over the tap to obtain the pressure reading.

The fireplace and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of one-half (1/2) psig (3.5 kPa).

The fireplace must be isolated from the gas supply piping system by closing its individual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than one-half (1/2) psig (3.5 kPa).

NOTE: Electrical wiring must be installed by a licensed electrician.

DISCONNECT REMOTE CONTROLS IF YOU ARE ABSENT FOR EXTENDED TIME PERIODS. THIS WILL PREVENT ACCIDENTAL FIREPLACE OPERATION.

For Standing Pilot Ignition Wiring

Appliance Requirements

•This appliance DOES NOT require 110-120 VAC to operate.

WARNING

DO NOT CONNECT 110-120 VAC TO THE

GAS CONTROL VALVE OR THE

APPLIANCE WILL MALFUNCTION AND

THE VALVE WILL BE DESTROYED.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents What to do if you smell gas Heat-N-Glo FireplaceSafety and Warning Information Safety and Warning Information Table of ContentsCodes Approvals and CodesGetting Started Venting and Installation Diagram of the AT-ZC Horizontal Venting Installing the Insert Step Vent SystemVent System Installation Precautions Vent System ApprovalsConnecting the Vent Pipe To Avoid Downdrafts AND/OR Cold AIR Page Exhaust Inlet AIR Starting Collar Gas Controls Systems Standing Pilot Ignition SystemGas Supply Line Step Gas Supply LineStep Gas Pressure Requirements Wiring Fireplace Pressure Natural Gas PropaneAppliance Requirements Remote Wall Switch Optional AccessoriesPlacing the Ember Material Step Installing Logs Ember MaterialPositioning the Logs Save the log instructions with this manualGlassAssembly ANY Manner Step Installing Trim SurroundsMantel Double-check for gas leaks Step Before Lighting Appliance After InstallationReview safety warnings and cautions Double-check for faulty componentsMaintaining and Servicing Your Appliance Appliance MaintenanceBurner Flame Patterns Standing Pilot Only Replacement Parts AccessoriesPart Part Description Standing PilotPart Part Description ZC-3624-3 ZC-3627-4 ZC-4028-3 ZC-3627-3 DF-ZC Trim Door Accessories

AT-ZC specifications

The Heat & Glo LifeStyle AT-ZC is a modern gas fireplace designed to bring both warmth and elegance to contemporary spaces. This innovative fireplace stands out with its unique features, advanced technologies, and stylish characteristics, making it a significant choice for homeowners seeking functionality and aesthetics.

One of the standout features of the LifeStyle AT-ZC is its versatile design options. The fireplace can be installed in various settings, whether as a traditional built-in unit or a sleek, wall-mounted fixture. This flexibility allows homeowners to seamlessly integrate the fireplace into their existing décor, optimizing space while enhancing visual appeal.

The AT-ZC is equipped with Heat & Glo’s advanced technology systems that ensure maximum efficiency and performance. The Direct Vent technology allows for the installation of the fireplace without the need for a traditional chimney, venting combustion gases directly outside. This not only enhances safety but also provides improved heat efficiency, making the most out of the gas fuel.

Another remarkable characteristic is its wide viewing area, thanks to the full glass front. This design element ensures that the flames are the focal point of any room, creating an inviting and cozy atmosphere. The fireplace also comes equipped with ambient lighting options that can be customized to suit personal preferences, allowing users to create the perfect ambiance.

The LifeStyle AT-ZC features a user-friendly control system, often compatible with mobile apps or remote controls, enabling homeowners to adjust the temperature and flames easily. This feature adds convenience, allowing for effortless temperature regulation and ensuring that the living space remains comfortable in all seasons.

Safety is a crucial consideration in any heating appliance, and the AT-ZC does not disappoint. Its built-in safety features, including automatic shut-off mechanisms and child safety locks, provide peace of mind for families with young children or pets.

In conclusion, the Heat & Glo LifeStyle AT-ZC is an exceptional choice when it comes to modern gas fireplaces. Its blend of design versatility, advanced tech features, and emphasis on safety makes it an attractive and practical addition to any home. Whether for warmth during cold months or as a stunning centerpiece, the AT-ZC delivers performance and style, meeting the needs of today's homeowners.
Top Page Image Contents