Heat & Glo LifeStyle AT-ZC manual Approvals and Codes

Page 4

1

Approvals and Codes

1

Approval Listings Appliance Certification

and Codes

The Heat-N-Glo models discussed in this Installers

 

Guide have been tested to certification standards and

 

listed by the applicable laboratories.

 

 

 

 

 

 

 

CERTIFICATION

MODEL

LABORATORY

TYPE

STANDARD

 

 

 

 

AT-ZC

Underwriters

Direct Vent

ANSI Z21.44•CGA2.19/IR#41

 

Laboratories

Wall Furnace

 

 

 

 

 

Installation Codes

The appliance installation must conform to local codes. Before installing the appliance, consult the local building code agency to ensure that you are in compliance with all applicable codes, including permits and inspections.

In the absence of local codes, the fireplace installation must conform to the National Fuel Gas Code ANSI Z223.1 (in the United States) or the CAN/CGA- B149 Installation Codes (in Canada). The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes with the National Electric Code ANSI/NFPA No. 70 (in the United States), or to the CSA C22.1 Canadian Electric Code (in Canada).

These models may be installed in a bedroom or bed-sitting room in the U.S.A. and Canada.

High Altitude Installations

U.L. Listed gas appliances are tested and approved for elevations from 0 to 2,000 feet in the U. S. A. and are tested and approved for elevations from 0 to 4,500 feet in Canada.

When installing this appliance at an elevation above 2,000 feet (in the United States), it may be necessary to decrease the input rating by changing the existing burner orifice to a smaller size. Input should be reduced four percent (4%) for each 1,000 feet above sea level, unless the heating value of the gas has been reduced, in which case this general rule will not apply. To identify the proper orifice size, check with the local gas utility.

When installing this appliance at an elevation between 2,000 and 4,500 feet (in Canada), the input rating must be reduced by ten percent (10%).

When installing this appliance at an elevation above 4,500 feet (in Canada), check with local authorities.

Consult your local gas utility for assistance in determining the proper orifice for your location.

Image 4
Contents Heat-N-Glo Fireplace What to do if you smell gasSafety and Warning Information Table of Contents Safety and Warning InformationApprovals and Codes CodesGetting Started Venting and Installation Diagram of the AT-ZC Installing the Insert Step Vent System Vent System Installation PrecautionsVent System Approvals Horizontal VentingConnecting the Vent Pipe To Avoid Downdrafts AND/OR Cold AIR Page Exhaust Inlet AIR Starting Collar Standing Pilot Ignition System Gas Controls SystemsStep Gas Supply Line Gas Supply LinePressure Natural Gas Propane Step Gas Pressure Requirements Wiring FireplaceAppliance Requirements Optional Accessories Remote Wall SwitchStep Installing Logs Ember Material Positioning the LogsSave the log instructions with this manual Placing the Ember MaterialGlassAssembly Step Installing Trim Surrounds ANY MannerMantel Step Before Lighting Appliance After Installation Review safety warnings and cautionsDouble-check for faulty components Double-check for gas leaksAppliance Maintenance Maintaining and Servicing Your ApplianceBurner Flame Patterns Replacement Parts Accessories Standing Pilot OnlyStanding Pilot Part Part DescriptionPart Part Description ZC-3624-3 ZC-3627-4 ZC-4028-3 ZC-3627-3 DF-ZC Trim Door Accessories

AT-ZC specifications

The Heat & Glo LifeStyle AT-ZC is a modern gas fireplace designed to bring both warmth and elegance to contemporary spaces. This innovative fireplace stands out with its unique features, advanced technologies, and stylish characteristics, making it a significant choice for homeowners seeking functionality and aesthetics.

One of the standout features of the LifeStyle AT-ZC is its versatile design options. The fireplace can be installed in various settings, whether as a traditional built-in unit or a sleek, wall-mounted fixture. This flexibility allows homeowners to seamlessly integrate the fireplace into their existing décor, optimizing space while enhancing visual appeal.

The AT-ZC is equipped with Heat & Glo’s advanced technology systems that ensure maximum efficiency and performance. The Direct Vent technology allows for the installation of the fireplace without the need for a traditional chimney, venting combustion gases directly outside. This not only enhances safety but also provides improved heat efficiency, making the most out of the gas fuel.

Another remarkable characteristic is its wide viewing area, thanks to the full glass front. This design element ensures that the flames are the focal point of any room, creating an inviting and cozy atmosphere. The fireplace also comes equipped with ambient lighting options that can be customized to suit personal preferences, allowing users to create the perfect ambiance.

The LifeStyle AT-ZC features a user-friendly control system, often compatible with mobile apps or remote controls, enabling homeowners to adjust the temperature and flames easily. This feature adds convenience, allowing for effortless temperature regulation and ensuring that the living space remains comfortable in all seasons.

Safety is a crucial consideration in any heating appliance, and the AT-ZC does not disappoint. Its built-in safety features, including automatic shut-off mechanisms and child safety locks, provide peace of mind for families with young children or pets.

In conclusion, the Heat & Glo LifeStyle AT-ZC is an exceptional choice when it comes to modern gas fireplaces. Its blend of design versatility, advanced tech features, and emphasis on safety makes it an attractive and practical addition to any home. Whether for warmth during cold months or as a stunning centerpiece, the AT-ZC delivers performance and style, meeting the needs of today's homeowners.