Heat & Glo LifeStyle AT-ZC manual Step Before Lighting Appliance After Installation

Page 21

Step 9

Before Lighting

the Appliance

Step 10

Lighting the

Appliance

After the

Installation

Before lighting the appliance, be sure to do the following:

Review safety warnings and cautions

•Read the Safety and Warning Information section at the beginning of this Installers Guide.

Double-check for gas leaks

•Before lighting the appliance, double-check the unit for possible gas leaks.

Double-check vent terminations and front grilles for obstructions.

•Before lighting the appliance, double-check the unit for possible obstructions that could be blocking the vent terminations or the front grilles.

Double-check for faulty components

•Any component that is found to be faulty MUST BE replaced with an approved component. Tampering with the appliance components is DANGEROUS and voids all warranties.

A small amount of air will be in the gas supply lines. When first lighting the appliance, it will take a few minutes for the lines to purge themselves of this air. Once the purging is complete, the appliance will light and will operate normally.

Subsequent lightings of the appliance will not require this purging of air from the gas supply lines, unless the gas valve has been turned to the OFF position, in which case the air would have to be purged.

You’ve reviewed all safety warnings, you’ve checked the appliance for gas leaks, you know the vent system is unobstructed, and you’ve checked for faulty components. Now you’re ready to light the appliance.

WARNING

PLEASE REFER TO THE USER’S MANUAL FOR ALL CAUTIONS, SAFETY, AND WARNING INFORMATION PERTAINING TO THE LIGHTING AND OPERATION OF THE APPLIANCE.

LEAVE THIS INSTALLATION MANUAL WITH THE APPLIANCE FOR FUTURE REFERENCE.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents What to do if you smell gas Heat-N-Glo FireplaceSafety and Warning Information Safety and Warning Information Table of ContentsCodes Approvals and CodesGetting Started Venting and Installation Diagram of the AT-ZC Vent System Installation Precautions Installing the Insert Step Vent SystemVent System Approvals Horizontal VentingConnecting the Vent Pipe To Avoid Downdrafts AND/OR Cold AIR Page Exhaust Inlet AIR Starting Collar Gas Controls Systems Standing Pilot Ignition SystemGas Supply Line Step Gas Supply LineStep Gas Pressure Requirements Wiring Fireplace Pressure Natural Gas PropaneAppliance Requirements Remote Wall Switch Optional AccessoriesPositioning the Logs Step Installing Logs Ember MaterialSave the log instructions with this manual Placing the Ember MaterialGlassAssembly ANY Manner Step Installing Trim SurroundsMantel Review safety warnings and cautions Step Before Lighting Appliance After InstallationDouble-check for faulty components Double-check for gas leaksMaintaining and Servicing Your Appliance Appliance MaintenanceBurner Flame Patterns Standing Pilot Only Replacement Parts AccessoriesPart Part Description Standing PilotPart Part Description ZC-3624-3 ZC-3627-4 ZC-4028-3 ZC-3627-3 DF-ZC Trim Door Accessories

AT-ZC specifications

The Heat & Glo LifeStyle AT-ZC is a modern gas fireplace designed to bring both warmth and elegance to contemporary spaces. This innovative fireplace stands out with its unique features, advanced technologies, and stylish characteristics, making it a significant choice for homeowners seeking functionality and aesthetics.

One of the standout features of the LifeStyle AT-ZC is its versatile design options. The fireplace can be installed in various settings, whether as a traditional built-in unit or a sleek, wall-mounted fixture. This flexibility allows homeowners to seamlessly integrate the fireplace into their existing décor, optimizing space while enhancing visual appeal.

The AT-ZC is equipped with Heat & Glo’s advanced technology systems that ensure maximum efficiency and performance. The Direct Vent technology allows for the installation of the fireplace without the need for a traditional chimney, venting combustion gases directly outside. This not only enhances safety but also provides improved heat efficiency, making the most out of the gas fuel.

Another remarkable characteristic is its wide viewing area, thanks to the full glass front. This design element ensures that the flames are the focal point of any room, creating an inviting and cozy atmosphere. The fireplace also comes equipped with ambient lighting options that can be customized to suit personal preferences, allowing users to create the perfect ambiance.

The LifeStyle AT-ZC features a user-friendly control system, often compatible with mobile apps or remote controls, enabling homeowners to adjust the temperature and flames easily. This feature adds convenience, allowing for effortless temperature regulation and ensuring that the living space remains comfortable in all seasons.

Safety is a crucial consideration in any heating appliance, and the AT-ZC does not disappoint. Its built-in safety features, including automatic shut-off mechanisms and child safety locks, provide peace of mind for families with young children or pets.

In conclusion, the Heat & Glo LifeStyle AT-ZC is an exceptional choice when it comes to modern gas fireplaces. Its blend of design versatility, advanced tech features, and emphasis on safety makes it an attractive and practical addition to any home. Whether for warmth during cold months or as a stunning centerpiece, the AT-ZC delivers performance and style, meeting the needs of today's homeowners.
Top Page Image Contents