Heat & Glo LifeStyle AT-ZC manual Venting and Installation

Page 6

3

VENTING AND INSTALLATION

1.Heat -N-Glo gas inserts are designed for recessed installations into solid fuel Masonry or Factory Built Non Combustible fireplaces that have been installed in accordance with the National, Provincial, State and local building codes.

2.Minimum fireplace opening requirements are shown in Figure 1 of this instal- lation manual. The firebrick (refactory) can be removed from a factory built fireplace in order to gain minimum gas insert opening requirements.

3.To assure top performance, safety and efficiency, inserts must be installed with an approved flue liner as per CAN/CGA B-149 or National Fuel Code ANSI Z223 and these instructions.

WARNING

THE SOLID FUEL FIREPLACE HAS BEEN CONVERTED FOR USE WITH GAS ONLY AND CANNOT BE USED FOR BURNING WOOD OR SOLID FUELS UNLESS ALL ORIGINAL PARTS HAVE BEEN REPLACED AND THE FIREPLACE HAS BEEN REAPPROVED BY THE AUTHORITY HAVING JURISDICTION.

4.The solid fuel fireplace’s flue damper must be fully locked in the open position or removed for installation.

5.The chimney must be cleaned and in good working order and constructed of noncombustible materials.

6.Make sure that all chimney cleanouts fit properly so air cannot leak into the chimney.

7.Install the insert without the trim surround and make all gas, venting, and electrical connections.

WARNING

Under no circumstances cutting of sheet metal surfaces are al- lowed for installation.

If the factory built fireplace has no gas access holes provided, an access hole of 1” diameter (25mm) or less may be drilled through the lower sides or bottom of the combustion chamber in a proper workmanship like manner.

8.Install decorative trim surround. Please refer to instructions included with the trim surround.

Ensure there are no obstructions to side air passages of decora- tive trim once installed on insert.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Heat-N-Glo Fireplace What to do if you smell gasSafety and Warning Information Table of Contents Safety and Warning InformationApprovals and Codes CodesGetting Started Venting and Installation Diagram of the AT-ZC Vent System Approvals Installing the Insert Step Vent SystemVent System Installation Precautions Horizontal VentingConnecting the Vent Pipe To Avoid Downdrafts AND/OR Cold AIR Page Exhaust Inlet AIR Starting Collar Standing Pilot Ignition System Gas Controls SystemsStep Gas Supply Line Gas Supply LineStep Gas Pressure Requirements Wiring Fireplace Pressure Natural Gas PropaneAppliance Requirements Optional Accessories Remote Wall SwitchSave the log instructions with this manual Step Installing Logs Ember MaterialPositioning the Logs Placing the Ember MaterialGlassAssembly Step Installing Trim Surrounds ANY MannerMantel Double-check for faulty components Step Before Lighting Appliance After InstallationReview safety warnings and cautions Double-check for gas leaksAppliance Maintenance Maintaining and Servicing Your ApplianceBurner Flame Patterns Replacement Parts Accessories Standing Pilot OnlyStanding Pilot Part Part DescriptionPart Part Description ZC-3624-3 ZC-3627-4 ZC-4028-3 ZC-3627-3 DF-ZC Trim Door Accessories

AT-ZC specifications

The Heat & Glo LifeStyle AT-ZC is a modern gas fireplace designed to bring both warmth and elegance to contemporary spaces. This innovative fireplace stands out with its unique features, advanced technologies, and stylish characteristics, making it a significant choice for homeowners seeking functionality and aesthetics.

One of the standout features of the LifeStyle AT-ZC is its versatile design options. The fireplace can be installed in various settings, whether as a traditional built-in unit or a sleek, wall-mounted fixture. This flexibility allows homeowners to seamlessly integrate the fireplace into their existing décor, optimizing space while enhancing visual appeal.

The AT-ZC is equipped with Heat & Glo’s advanced technology systems that ensure maximum efficiency and performance. The Direct Vent technology allows for the installation of the fireplace without the need for a traditional chimney, venting combustion gases directly outside. This not only enhances safety but also provides improved heat efficiency, making the most out of the gas fuel.

Another remarkable characteristic is its wide viewing area, thanks to the full glass front. This design element ensures that the flames are the focal point of any room, creating an inviting and cozy atmosphere. The fireplace also comes equipped with ambient lighting options that can be customized to suit personal preferences, allowing users to create the perfect ambiance.

The LifeStyle AT-ZC features a user-friendly control system, often compatible with mobile apps or remote controls, enabling homeowners to adjust the temperature and flames easily. This feature adds convenience, allowing for effortless temperature regulation and ensuring that the living space remains comfortable in all seasons.

Safety is a crucial consideration in any heating appliance, and the AT-ZC does not disappoint. Its built-in safety features, including automatic shut-off mechanisms and child safety locks, provide peace of mind for families with young children or pets.

In conclusion, the Heat & Glo LifeStyle AT-ZC is an exceptional choice when it comes to modern gas fireplaces. Its blend of design versatility, advanced tech features, and emphasis on safety makes it an attractive and practical addition to any home. Whether for warmth during cold months or as a stunning centerpiece, the AT-ZC delivers performance and style, meeting the needs of today's homeowners.
Top Page Image Contents