display shows the temperature you want. The thermostat will override current pro- gramming and keep the room temperature at the selected temperature for two hours. After two hours, the thermostat will auto- matically revert to the program.
•HOLD TEMPERATURE — The thermostat can hold any temperature within its range for an indefinite period, without reverting to
the program. Press HOLDTEMP . HOLD will be
displayed. Then choose the desired hold
temperature by pressing 
or 
. The thermostat will hold the room tempera- ture at the selected setting until you press
RUN
PRGM to start program operation again.
This feature is ideal for energy conservation when the building is unoccupied for an ex- tended period of time.
•"ADVANCE PROGRAM" KEY — Press
ADV | to change the thermostat to the next |
PRGM |
program period. This will temporarily over- ride the program, until the next program period begins (for example, pressing this key while in the DAY program will advance the thermostat to the EVE program, which will remain in effect until the NHT program begins).
• °F/°C CONVERTIBILITY — Press TIME
FWD
TIME
and BACK at the same time until the tem-
perature display is in °C (Celsius). To display °F, repeat the process.
•ADJUSTABLE HEATING AND COOLING CYCLE TIMES (ANTICIPATION) — If the heating/cooling system is turning on and off too often (short cycles) or not often enough
15