White Rodgers 1F90W-71 manual Period Time Temp

Page 21

b.What temperature should the house be at this time? These will be your NHT (night) temperature settings.

Now look at the factory preprogrammed times and temperatures shown on the following page. If this program will suit your needs, simply press

RUN

PRGM to begin running the factory preset pro-

gram.

If you want to change the preprogrammed times and temperatures, do the following.

NOTE

To operate properly in the AUTO mode, there must be a minimum 1°F separation between the highest heat temperature and the lowest cool temperature (see diagram below).

78COOLING TEMPERATURES

76DEAD BAND 1°F

74HEATING TEMPERATURES

Heating Program for ALL days of the Week:

PERIOD	TIME	TEMP
MOR	5:00 AM	70
DAY	9:00 AM	70
EVE	4:00 PM	70
NHT	10:00 PM	64

Cooling Program for ALL Days of the Week:

PERIOD	TIME	TEMP
MOR	5:00 AM	78
DAY	9:00 AM	82
EVE	4:00 PM	78
NHT	10:00 PM	78

Image 21

Contents 1F90W-71 About Your New Thermostat Questions and Answers Your NEW Thermostats Programming YourOperating Your Thermostat Your NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display System Time SET Thermostat Buttons Used withButtons to 11 12 Operating Features EMR on Automatic Changeover TWO Hour Temperature OverAdvance Program KEY Press To change the thermostat to the nextConvertibility Press Time At the same time again Adjust anticipation. PressUse To returnHEAT-OFF-COOL-AUTO Total Keypad Lockout Limited Temperature RangeProgramming Your Thermostat Your Home Period Time Temp Entering Your Program Heating/Cooling Schedule Plan Sample Press and hold either Set Current Time and DayUntil Enter Heating ProgramPrgm to resume program operation Enter Cooling Program Check Your Programming How can I permanently change a part of my program? Ming Your ThermostatProgramming Your Thermostat Why can’t I program the thermostat in the Auto mode? Erating Your ThermostatGramming Your Thermostat Thermostat immediately, press Display is flashing BATTERY. What does this mean? See Operating Your THERMO- Stat Why is the system turning on and off so frequently seldom?Programming Your THERMO- Stat Ating Your ThermostatAny time you wish to turn your system off Simply press Is displayed, put the thermostat back on Part No -5088A

PERIOD

TIME

TEMP