5.Press DAYSET once. The display will show the
day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6.Press and hold either TIMEFWD or BACKTIME until you reach the current day of the week.
7.Press PRGMRUN once. The display will show the
correct time and room temperature alter- nately.
Enter Heating Program
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume
24
programming after this happens, press PRGMVIEW
until you are at the point where you stopped programming. Then you may continue to enter your programs normally. If you want to stop
programming at any time, simply press PRGMRUN to
resume program operation.
1. Press | SYSTEM | until HEAT is displayed. |
SWITCH |
2.Press PRGMVIEW once. 5 DAY (indicating week-
day program), and MOR, representing the morning heating period, will appear in the display. Also displayed are the currently programmed start time for the MOR period and the currently programmed temperature.
