Enter Cooling Program
!CAUTION
If outside temperature is below 50°F, we recommend that you remove the ther- mostat from the wall before proceeding with the following steps to program cool- ing temperatures. Personal injury or property damage may occur due to air conditioner compressor slugging. A fresh 9 volt Energizer® alkaline battery must be installed to perform
1. Press | SYSTEM | until COOL appears. |
SWITCH |
2.Enter your cooling program by following the procedure for entering your heating program.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one final time before beginning thermostat operation.
1. Press | SYSTEM | until HEAT is displayed. |
SWITCH |
2.Press and hold PRGMVIEW to view the heating
period times and temperatures in se- quence for weekday MOR, DAY, EVE, and NHT, then for weekend MOR, DAY, EVE, and NHT.
26