OPERATING YOUR THERMOSTAT
Before you begin programming your new ther- mostat, you should be familiar with its fea- tures and with the display and the location and operation of the thermostat buttons. The in- formation in this section will help you become familiar with your thermostat so that you can easily program it.
Your thermostat consists of two parts: the ther- mostat body and the subbase.
!CAUTION
Use | SYSTEM | to turn thermostat OFF be- |
SWITCH |
fore removing or attaching the thermo- stat body. Equipment damage and/or personal injury could occur.
The subbase is attached to the wall, but you can remove the thermostat body for easy program- ming. To remove the thermostat body from the subbase, grasp the thermostat body and gently pull it out from the bottom of the subbase, then pivot up. To attach the thermostat body, line up the four terminal pins on the upper section of the thermostat back with the matching connector on the subbase. Insert these, then gently pivot the thermostat body down to connect the nine pin connectors on the lower portion of the ther- mostat back. Gently push until the snap con- nectors engage. DO NOT FORCE OR PRY THE THERMOSTAT, as this may damage the unit.
5