Desa VTD-24P-BTB installation manual What to do if YOU Smell GAS, Ansi Z21.60-2003 CSA

Page 1

GAS LOG VENTED

DECORATIVE APPLIANCE

OWNER’S OPERATION AND

INSTALLATION MANUAL

For more information, visit www.desatech.com

VTD-24N-PDG, VTD-24P-PDG, VTD-18N-PDG, VTD-18P-PDG

ANSI Z21.60-2003

CSA 2.26-2003

APPROVED

VTD-24N-BTB, VTD-24P-BTB, VTD-18N-BTB, VTD-18P-BTB

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, per- sonal injury, or loss of life.

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas sup- plier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING: Improper installation, ad- justment, alteration, service, or main- tenance can cause injury or property damage. Refer to this manual for correct installation and operational procedures. For assistance or addi- tional information consult a qualified installer, service agency, or the gas supplier.

WARNING: This appliance is for in- stallation only in a solid-fuel burn- ing masonry or UL127 factory-built fireplace, constructed of noncom- bustible material, and connected to a working flue. (See page 7 for minimum flue opening.)

WARNING: This is a gas-fired appliance. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to the National Fuel Gas Codes, ANSI Z233.1/NFPA 54, Section 5.3, Air for Combustion and Ventilation.

This appliance may be installed in an aftermarket,* manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate.This appliance is not convertible for use with other gases.

Warning: This product must be installed by a Licensed Plumber or Gas Fitter when installed within The Commonwealth of Massachusetts.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

Save this manual for future reference.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Ansi Z21.60-2003 CSA What to do if YOU Smell GASSafety Information Table of ContentsProduct Identification Local CodesProduct Features Optional Remote Control AccessoriesUnpacking AIR for Combustion and VentilationVentilation AIR Determining FRESH-AIR Flow for Appliance LocationVentilation Air from Outdoors Installation Connecting to GAS Supply Installing Appliance AssemblyInstallation Items Needed Checking GAS Connections Pressure Testing gas Supply Piping systemValve Pressure Testing Appliance Gas ConnectionsOperating Appliance For Your Safety Read Before LightingLighting Instructions Remote Control Operation Manual Lighting ProcedureTo Turn OFF GAS to Appliance Operating Appliance Inspecting Burner Cleaning and MaintenancePilot Flame Pattern Burner Flame PatternObserved Problem Possible Cause Remedy TroubleshootingRefer to Air for Combustion and Venti Observed Problem Possible Cause VTD-18N-PDG/VTD-18N-BTB SpecificationsReplacement Parts Wiring DiagramService Hints Technical ServiceThis page Intentionally Left Blank Illustrated Parts Breakdown Illustrated Parts BreakdownParts List Accessories Owners Registration Form Postage Required 111826-02F Warranty Information

VTD-24P-BTB, VTD-18P-BTB, VTD-24P-PDG, VTD-18N-BTB, VTD-18N-PDG specifications

Desa VTD-18N-BTB, VTD-18P-BTB, VTD-24P-PDG, VTD-24P-BTB, and VTD-18N-PDG are notable offerings in the realm of heaters, designed to provide efficient and effective heating solutions for various environments. Each model boasts a range of features and technologies that cater to different needs and preferences, promoting comfort and convenience.

Starting with the VTD-18N-BTB and VTD-18P-BTB, these models are engineered with a focus on reliability and performance. They come equipped with advanced heating technology that ensures rapid warmth distribution in residential or commercial spaces. Featuring adjustable heat settings, users can customize the temperature according to their comfort levels. The BTB designation indicates that these models possess a robust build quality, designed to withstand heavy use, while maintaining aesthetic appeal.

The VTD-24P-PDG and VTD-24P-BTB are designed for larger areas, delivering an increased heat output to accommodate more substantial spaces. These models incorporate energy-efficient technology, which aids in reducing overall energy consumption while providing consistent heat. Moreover, the programmable thermostat feature available in these units allows users to set specific heating schedules, significantly enhancing energy efficiency and convenience.

The VTD-18N-PDG stands out with its unique design and advanced features. This model combines a sleek and modern aesthetic with high functionality, making it suitable for contemporary interiors. It utilizes a dual-fuel technology option, providing the flexibility to operate on either gas or electric power, thus enhancing versatility in use. This feature is particularly beneficial for areas with fluctuating energy availability.

In terms of safety, all models incorporate essential safety mechanisms, including overheating protection and tip-over switches, ensuring peace of mind for users. The combination of portability and performance allows for seamless placement in various settings, from home living rooms to workshops and garages.

Overall, Desa's VTD series reflects a commitment to quality and innovation, promoting efficient heating solutions that cater to varying space and user requirements. These models are ideal for users seeking dependable heating options without compromising on style, functionality, or safety.
Top Page Image Contents