Desa CF26PR Operating Heater, To Turn OFF GAS To Appliance, Manual Lighting Procedure

Page 17

OWNER’S MANUAL

OPERATING

HEATER

Continued

Note: If pilot does not stay lit, con- tact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Light- ing Procedure.

8.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

If control knob does not pop out when released, contact a qualified service person or gas supplier for repairs.

Note: If pilot goes out, repeat steps 4 through 8.

9.Slightly push in and turn control

knob counterclockwise to the ON position.

10.Wait one minute and switch selector switch to the ON position to light burner.

11.Set flame adjustment knob to any level between HI and LO.

CAUTION: Do not try to adjust heating levels by using the equip- ment shutoff valve.

WARNING: Make sure the selector switch is in the OFF po- sition when you are away from home for long periods of time. Heater will come on automati- cally with selector switch in the ON position.

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1.Turn control knob clockwise to the OFF position.

2a. Set selector switch in the OFF position

2b. If Using Optional Hand-Held Re- mote: Set selector switch in the OFF position to keep from draining battery.

Shutting Off Burner Only (pilot stays lit)

You may shut off the burner and keep the pilot lit by doing one of the following:

1.Turn control knob clockwise to the PILOT position.

2.Use remote control manual OFF button.

3.Set selector switch in the OFF position.

MANUAL LIGHTING

PROCEDURE

1.Follow steps 1 through 6 under Light- ing Instructions, page 16.

2.Depress control knob and light pilot with match.

3.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob. Now follow steps 9 through 11, column 1.

OPTIONAL REMOTE

OPERATION

Note: All remote control accessories must be purchased separately (see Accessories, page 28). Follow instructions included with the remote control.

Thermostat Control Operation

(Optional CGHRCT Series Only) The thermostat control setting on the remote control unit can be set to any comfort level between HI and LO. The burner will turn on and off automatically to maintain the comfort level you select. The ideal comfort setting will vary by household depending upon the amount of space to be heated, the output of the central heat- ing system, etc.

NOTICE: You must light the pilot before using the hand-held re- mote control unit. See Lighting Instructions on page 16 and 17.

1.After lighting, let pilot flame burn for about one minute. Turn control knob to ON position. Adjust flame adjust- ment knob anywhere between HI and LO. Slide the selector switch to the REMOTE position. NOTE: The burner may light if hand-held remote ON button was on when selector switch was last turned off. You can now turn the burner on and off with the hand-held remote control unit.

IMPORTANT: Do not leave the selector switch in the REMOTE position when the pilot is not lit. This will drain the battery.

IMPORTANT: Be sure to press the ON/ OFF buttons on the hand-held remote control unit for up to 3 seconds to assure proper operation.

CGHRC Operation:

2a. Press the ON/OFF button to turn the burner on and off. When turning burner off, the pilot will remain lit.

Pilot Burner

Ignitor

 

 

Electrode

 

Control Knob in

Flame Adjustment Knob

On Position

ON

OFF REMOTE

L

IH

O

O

F F

PILO T

O

N

Figure 34 - Pilot

Selector Switch in Remote Position (Optional Remote Control)

Figure 35 - Setting the Selector Switch, Control Knob, and Flame Adjustment Knob for Remote Operation

Continued

105442

17

For more information, visit www.desatech.com

Image 17
Contents What to do if YOU Smell GAS VENT-FREE PROPANE/LP GAS BAY Front FireplaceVENT-FREE PROPANE/LP BAY Front Fireplace Safety InformationRemote Control Accessories Product FeaturesLocal Codes UnpackingProviding Adequate Ventilation AIR for Combustion and VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining if You Have a Confined or Unconfined Space AIR for Combustion VentilationDetermining FRESH-AIR Flow for Fireplace Location Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Installation Items InstallationCheck GAS Type Locating FireplaceDepth BUILT-IN Fireplace InstallationOptional Mantel Installation Mantel Clearances for BUILT-IN InstallationRemoving Brick Liner Retainer Assembling Brass TrimInstalling Snap Bushings Installing Blower Assembly GA3450TBlower Control Shield Clamp Wire For Built-In InstallationWith 1/8 NPT Tap Connecting to GAS SupplyInstallation Items Needed Connecting Fireplace to GAS SupplyChecking GAS Connections Pressure Testing Fireplace Gas ConnectionsPressure Testing Gas Supply Piping System Optional Wireless HAND- Held Remote Control Accessories Installing LogsInstalling Wireless Remote Control Accessory Cghrc & Cghrct Series Installing ReceiverOperating Fireplace For Your Safety Read Before Lighting InstructionsOperating Heater Manual Lighting ProcedureTo Turn OFF GAS To Appliance Optional Remote OperationPilot Flame Pattern Inspecting BurnersBurner Flame Pattern Burner Primary AIR HolesReplacement Parts Cleaning and MaintenanceObserved Problem Possible Cause Remedy TroubleshootingMaintenance, Top Service Hints SpecificationsTechnical Service Parts Centrals Wiring DiagramCF26PR Illustrated Parts BreakdownKEY Part Number Description QTY Parts List20-1 11-1 20-2 20-3 11-2 KEY CF26PR Description QTY Brass Accent Trim GA6095 Accessories105442 International Warranty Information

CF26PR specifications

Desa CF26PR is a cutting-edge energy-efficient home solution that combines contemporary design with advanced technology to create a sustainable living environment. This model is particularly popular among eco-conscious homeowners looking to minimize their carbon footprint while enjoying modern comforts.

One of the standout features of the Desa CF26PR is its innovative insulation technology, which ensures optimal thermal performance throughout the year. The advanced insulation materials used in the walls and roof effectively prevent heat loss in the winter and heat gain in the summer, contributing to lower energy bills and enhanced comfort. The design also allows for natural ventilation, promoting air circulation and reducing reliance on artificial cooling systems.

The home is equipped with a state-of-the-art solar energy system, harnessing sunlight to generate electricity and significantly reducing dependency on traditional power sources. This solar technology powers essential appliances and lighting within the home, further contributing to its energy-efficient profile. Smart home integration is another key characteristic of the Desa CF26PR, allowing residents to control lighting, heating, and security systems through mobile devices or voice commands.

The interior layout of Desa CF26PR is thoughtfully designed for functionality and aesthetics, featuring open-concept living spaces that maximize natural light. High ceilings and large windows create an inviting atmosphere, making the home feel spacious and airy. The choice of sustainable materials in construction and interior finishes illustrates a commitment to both quality and environmental responsibility.

Additionally, the Desa CF26PR offers a range of customizable options, allowing buyers to tailor the design elements and features to suit their individual needs. This adaptability makes it suitable for families of all sizes, providing ample space with smart storage solutions.

In conclusion, Desa CF26PR stands out as an exemplary model in the realm of sustainable housing. Its integration of energy-efficient technologies, sustainable materials, and modern design features positions it as a leading choice for environmentally-conscious homeowners. Whether it's the advanced insulation, solar energy capabilities, or smart technology integration, the Desa CF26PR embodies the future of smart and sustainable living.