Desa VS42(1), S42RH, VS42H(1) Chase Installations, Foot Rule, Finishing the Fireplace

Page 10

VENTING INSTALLATION

Continued

Terminations with 16" slip pipe sections are avail- able. The RTT-8DM and RTTL-8DM are approved for flashing installations. When needed, these adjustable terminations may be used in combina- tion with the pipe assembly to achieve the correct chimney height.

Note: In the rare instance there is a problem with the side driven rain or wind or the chimney is not drafting properly, an ADS-8DM (Anti-Draft Shield) can be used with round terminations.

CHASE INSTALLATIONS

Instructions for chase installations are included with the chase style termination chosen. In a multiple chase installation, be sure to provide adequate distance between terminations to prevent smoke spillage from one termination to another. We suggest that terminations be separated at least 24", center to center and stacked at a vertical height difference of 18" (see Figure 16).

Note: If a decorative shroud is to be installed, contact the manufacturer for specifications.

18"

Min.

Typ.

24" Min.

24" Min.

Figure 16 - Multiple Chase Installation

10 FOOT RULE

All flue gas outlet chimney terminations must extend a minimum of 3 feet in height above the highest point where it passes through the roof and must be at least 2 feet above the highest point of the roof that is within a horizontal distance of 10 feet (see Figure 17).

10'

Level of

 

Flue Gas

 

 

 

 

Outlet

 

 

10'

 

2' Min.

3' Min.

 

 

 

 

2' Min.

3' Min.

 

 

Figure 17 - 10 Foot Rule

FINISHING THE FIREPLACE

Combustible materials, such as wallboard, gypsum board, sheet rock, drywall, plywood, etc. may make direct contact with sides and top around the fireplace face. It is important that combustible materials do not overlap the face itself. Brick, glass, tile or other noncombustible materials may overlap the front face provided they do not obstruct essential open- ings like louvered slots or any other opening. When overlapping with a noncombustible facing material, use only noncombustible mortar or adhesive.

10

www.desatech.com

111099-01C

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Save this Book Table of Contents Safety InformationSpecifications Minimum Clearance to Combustibles Selecting LocationFraming Hearth Extension MantelsOptional Outside AIR KIT Model AK4/AK4F Venting InstallationAssembly and Installation Chimney PipeUsing Elbow Offsets 30E-8DM Elbow SET onlyFirestop Spacers FS-8DM Penetrating the RoofFlashing Installation V6F-8DM or V12F-8DM Storm Collar Installation SC1 or SC2Foot Rule Chase InstallationsFinishing the Fireplace Optional GAS Line Installation Typical Residential InstallationsOperation Maintenance Guidelines Glass DoorsTechnical Service Outside AIR and Damper Handle OperationIllustrated Parts Breakdown Woodburning Fireplace ModelsParts List QTY KEY NO. Part no DescriptionReplacement Parts Accessories111099-01C 111099-01C 111099-01C Not a UPC

S42RH, S42R, VS42(1), VS42H(1), S42H specifications

Desa VS42(1), S42RH, VS42H(1), S42H, and S42R are part of a comprehensive line of residential heating appliances designed to offer efficient and effective heating solutions for various living spaces. These models are known for their unique features, advanced technologies, and characteristics that set them apart in the market of home heating.

The Desa VS42(1) model boasts a sleek design with an emphasis on modern aesthetics while maintaining functional excellence. It features advanced thermostatic controls that allow users to maintain their desired temperature effortlessly. The efficient combustion system maximizes fuel usage, ensuring a higher output of heat with minimal emissions, thereby promoting an eco-friendly approach to home heating.

Similarly, the S42RH model is equipped with cutting-edge safety features, including automatic shut-off systems that prevent overheating and potential accidents. Its innovative design also allows for easy installation, making it a popular choice for homeowners looking to upgrade their heating systems. The versatile design is suitable for various home styles, seamlessly fitting into traditional or contemporary settings.

The VS42H(1) variant stands out due to its compatibility with smart home systems, allowing users to control the heating remotely through smartphone applications. This level of convenience is enhanced by its energy-efficient operation, which reduces heating costs while ensuring a comfortable living environment. Furthermore, this model incorporates high-quality insulation materials that improve heat retention for longer periods.

In contrast, the S42H model emphasizes user-friendly operation without compromising performance. Its straightforward controls and efficient heating technology make it an ideal choice for families. The model also offers multiple heating settings to cater to different environments and user preferences, providing customizable comfort.

Finally, the S42R offers remarkable adaptability, featuring a flexible venting system that permits installation in various locations within the home. This versatility is complemented by its robust build quality that ensures durability and longevity. The combination of these characteristics makes the S42R an attractive choice for homeowners seeking reliability and performance.

In summary, the Desa VS42(1), S42RH, VS42H(1), S42H, and S42R models present a range of features aimed at enhancing user experience while prioritizing energy efficiency and safety. These appliances are designed to meet the diverse needs of consumers, ensuring that comfort and functionality go hand in hand.
Top Page Image Contents