Locating Your Fireplace

Irving Oil

INSTALLATION & OPERATING INSTRUCTIONS

This gas fireplace should be installed by a qualified installer in accordance with local building codes and with current CSA-B149 (.1 or .2) Installation codes for Gas Burning Appliances and Equipment. For USA Installations follow local codes and/or the current National Fuel Gas Code. ANSI Z223.1. If the unit is being installed in a mobile home the installation should comply with the current CAN/USA Z240.4 Code.

FOR SAFE INSTALLATION AND OPERATION PLEASE NOTE THE FOLLOWING:

1 . This fireplace gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of fireplace high surface temperatures and should stay away to avoid burns or ignition of clothing.

3.CAUTION: Due to high glass surface temperature children should be carefully supervised when in the same room as fireplace.

4.Under no circumstances should this fireplace be modified. Parts removed for servicing should be replaced prior to operating this fireplace again.

IMPORTANT:

PLEASE REVIEW THE FOLLOWING CAREFULLY

Remove any plastic from parts before turning the fireplace ON.

It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine. It is not unusual for your gas fireplace to give off some odor the first time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

Please ensure that your room is well ventilated- open all windows.

It is recommended that you burn your fireplace for at least ten (10) hours the first time you use it. If the optional fan kit has been installed, place the fan switch in the “OFF” position during this time.

5.Installation and any repairs to fireplace must be performed by qualified installer, service agency or gas supplier. A professional service person should be contacted to inspect fireplace annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this fireplace should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this fireplace.

7.The venting system (chimney) of this fireplace should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your fireplace clear of combusti- ble materials, gasoline and other flammable vapour and liquids. This fireplace should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or around the fireplace.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this fireplace.

10.The flow of combustion and ventilation air must not be obstructed in any way.

	12" (305mm)
A
	D
12" (305mm)	B
	C
	E
	F
	Fig. 1

A - *Flat on wall	B - *Room divider	C - Island
D - Cross corner	E - Flat on wall corner

*A & B must maintain a 12” (305 mm) clearance between the wall and side glass of fireplace.

There is a minimum vertical rise required for the

venting which varies depending on the application. The maximum horizontal run also has restrictions. Become familiar with the venting instructions starting on page 9, before starting the installation.

11.When the fireplace is installed directly on carpeting, vinyl tile or any combustible material other than wood, this fireplace must be installed on a metal or wood panel extending the full width and depth of the fireplace.

12.This fireplace requires adequate ventilation and combustion air to operate properly.

13.This fireplace must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

14.When the fireplace is not in use it is recommended that the gas control valve be left in the OFF position.

10004000

CLEARANCE TO COMBUSTIBLES

Adequate clearances as listed below must be main- tained for servicing and proper operation.

Back	0”
Side	12”
Floor	0”
Top	36”
Corner	0” to Back Edges
Vent Pipe	1”

	3

IRFSDV24, IRFSDV34 specifications

The Vermont Casting IRFSDV34 and IRFSDV24 are two exceptional models in the line of high-quality gas fireplaces that blend efficiency, style, and advanced technology. Designed to provide warmth and comfort, these fireplaces are perfect for homeowners looking to enhance their living spaces with an attractive and functional heating solution.

Both models are designed for superior performance, featuring an efficient gas burner that ensures even heat distribution. The IRFSDV34 has a larger firebox compared to the IRFSDV24, making it an ideal choice for larger rooms, while the IRFSDV24 is perfect for smaller spaces. This versatility allows consumers to select the model that best fits their home layout and heating requirements.

One of the standout features of the Vermont Casting fireplaces is their realistic flame presentation. The advanced flame technology simulates the flickering glow of real wood, adding an inviting ambiance to any setting. The adjustable flame height also allows users to personalize the heat output and brightness, catering to both functional and aesthetic needs.

In terms of efficiency, both the IRFSDV34 and IRFSDV24 are engineered to achieve high efficiency ratings, ensuring that they provide significant heat while consuming less fuel. This makes them an environmentally friendly choice for heating, leading to potential savings on energy bills. The models are also equipped with an adjustable air shutter that allows for precise control over combustion, enhancing overall performance.

Safety is a crucial factor in any gas fireplace, and Vermont Castings have prioritized this in both models. Equipped with features like a safety shut-off system and tempered safety glass, these fireplaces ensure peace of mind while enjoying the warmth they provide. Additionally, both models are designed for ease of use, with an intuitive control panel that simplifies operation.

The aesthetics of the Vermont Casting IRFSDV34 and IRFSDV24 are equally impressive. Available in a variety of finishes, they can seamlessly integrate into different interior designs, making them a stylish addition to any home. The classic cast iron construction not only imparts a timeless look but also ensures durability and longevity.

Overall, the Vermont Casting IRFSDV34 and IRFSDV24 fireplaces encapsulate a perfect balance of technology, efficiency, and design, providing homeowners with an unparalleled heating experience. Whether seeking to create a cozy atmosphere or enhance the heating capabilities of their living space, these models stand out as premier choices in the market.