GAS Specifications, Preparation | Vermont Casting IRFSDV24 manual

GAS SPECIFICATIONS

			Max.	Max.
			Input	Input
Model	Fuel	Gas Control	BTU/h	BTU/h
IRFSDV24RN	Nat	Millivolt Hi/Lo	20,000	14,000
IRFSDV24RP	Prop	Millivolt Hi/Lo	20,000	15,000

IRFSDV34RFN	Nat	Radio Frequency	30,000	21,000

IRFSDV34RFP	Prop	Radio Frequency	30,000	22,500

This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is available and used.

Input ratings are shown in BTU per hour and are certified without deration for elevations up to 4,500 feet (1,370 m) above sea level.

For elevations above 4,500 feet (1,370 m) in USA, installations must be in accordance with the current ANSI Z223.1 and/or local codes having jurisdiction.

In Canada, please consult provincial and/or local authorities having jurisdiction for install- ations at elevations above 4,500 feet (1,370 m).

CFM186

IRFSDV24/IRFSDV34

CERTIFIED TO

ANSI Z21.88b-1999 / CSA 2.33b-M99

Vented Gas Fireplace Heaters

GAS INLET AND MANIFOLD PRESSURES

	Natural	LP (Propane)
Input Minimum	5.5” wc	11” wc

Input Maximum	14” wc	13” wc

Irving Oil

PREPARATION

The use of wall paper adjacent to this fireplace is not recommended, as the high heat given off by this fireplace may adversely affect the binders in the adhesive used to apply the wallpaper.

Before beginning, remove the window frame assembly from the fireplace. Also check to make sure there is not hidden damage to the fireplace. Take a minute and plan out the gas, vent and electrical supply. See Window Frame Assembly Section.

GAS LINE INSTALLATION

When purging the gas line, the front glass must be removed.

The gas pipeline can be brought in through the rear of the fireplace as well as the bottom. Opening is provided on the bottom behind the valve to allow for the gas pipe installation and testing of any gas connecion. It is most convenient to bring the gas line in from the rear right side of the valve, as this allows fan installation or removal without disconnecting the gas line.

The gas line connection can be made with properly tinned 3/8” copper tubing, 3/8” rigid pipe or an approved flex con- nector. Since some municipalities have some additional local codes, it is always best to consult your local authority and the CSA-B149 (.1 or .2) installation code. For USA Installations consult the current National Fuel Gas Code, ANSI Z223.1.

Always check for gas leaks with a mild soap and water solution. Do not use an open flame for leak testing.

The gas control is equipped with a captured screw type pressure test point, therefore it is not necessary to provide a 1/8” test point up stream of the control.

1/2" Gas Supply

1/2" X 3/8" Reducer

3/8" Nipple

3/8" X 3/8" Shut Off Valve

3/8" Nipple

3/8" Union

Manifold Pressure 3.5” wc

10” wc

TYPICAL GAS LINE CONNECTION

3/8" Nipple

Fig. 2

10004000

IRFSDV24, IRFSDV34 specifications

The Vermont Casting IRFSDV34 and IRFSDV24 are two exceptional models in the line of high-quality gas fireplaces that blend efficiency, style, and advanced technology. Designed to provide warmth and comfort, these fireplaces are perfect for homeowners looking to enhance their living spaces with an attractive and functional heating solution.

Both models are designed for superior performance, featuring an efficient gas burner that ensures even heat distribution. The IRFSDV34 has a larger firebox compared to the IRFSDV24, making it an ideal choice for larger rooms, while the IRFSDV24 is perfect for smaller spaces. This versatility allows consumers to select the model that best fits their home layout and heating requirements.

One of the standout features of the Vermont Casting fireplaces is their realistic flame presentation. The advanced flame technology simulates the flickering glow of real wood, adding an inviting ambiance to any setting. The adjustable flame height also allows users to personalize the heat output and brightness, catering to both functional and aesthetic needs.

In terms of efficiency, both the IRFSDV34 and IRFSDV24 are engineered to achieve high efficiency ratings, ensuring that they provide significant heat while consuming less fuel. This makes them an environmentally friendly choice for heating, leading to potential savings on energy bills. The models are also equipped with an adjustable air shutter that allows for precise control over combustion, enhancing overall performance.

Safety is a crucial factor in any gas fireplace, and Vermont Castings have prioritized this in both models. Equipped with features like a safety shut-off system and tempered safety glass, these fireplaces ensure peace of mind while enjoying the warmth they provide. Additionally, both models are designed for ease of use, with an intuitive control panel that simplifies operation.

The aesthetics of the Vermont Casting IRFSDV34 and IRFSDV24 are equally impressive. Available in a variety of finishes, they can seamlessly integrate into different interior designs, making them a stylish addition to any home. The classic cast iron construction not only imparts a timeless look but also ensures durability and longevity.

Overall, the Vermont Casting IRFSDV34 and IRFSDV24 fireplaces encapsulate a perfect balance of technology, efficiency, and design, providing homeowners with an unparalleled heating experience. Whether seeking to create a cozy atmosphere or enhance the heating capabilities of their living space, these models stand out as premier choices in the market.