LG Electronics SX95TZW-S, SX95TZW-D Speaker Connection, Wireless connection, LED Color Operation

Installation 25

Speaker Connection

Wireless connection

When you turn on the unit, subwoofer and wireless receiver the connection will be completed automatically.

When the connection is completed, you can see the icon on the display window.

LED indicator of wireless receiver

LED Color	Operation
Blue	The wireless receiver is
	receiving the signal of the
	wireless transmitter.
Red	The Wireless Receiver is in
	standby mode.
Off	The Wireless Receiver is
(No display)	turned off.

NOTE

•If the wireless connection fails again, check whether there is any confl ict or strong interference (for example, interference from other electronic devices) around your location. After removal of the confl ict or strong interference, repeat the above procedures.

•The available length is 20 m for wireless connection on open place.

NOTE

•If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there.

•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.

•It takes a few seconds (and may take longer) for the Wireless Transmitter and Wireless Receiver to communicate with each other.

Wireless connection for manually

You can set up wireless connection manually, when your connection is not completed. Refer to the “Connect wireless speakers” on page 42.

3

Installation

HX995TZW-FD.BPANLLK_ENG_3803.indd 25 10. 10. 06 ￿￿ 11:07