LG Electronics SX95TZW-D, SX95TZW-W96 Using the virtual keyboard, Keyboard Mode, Keypad Mode

74

Operation

Using the virtual keyboard

On the virtual keyboard, there are two input modes for the entering a character. Press the yellow (Y) coloured button to toggle the display between keyboard mode and keypad mode.

Keyboard Mode

Use U/u/I/i to select a letter on the screen, and press ENTER () to confi rm your selection.

Keypad Mode

This mode allows you to enter letters by pressing the buttons on the remote control. Press the buttons with the required letter once, twice, three or four times until the letter is displayed.

4

Operation

[Cancel] – Return to the previous screen.

[Space] – Inserts a space at the cursor position.

[Backspace] – Deletes the previous character at the cursor position.

[ABC / abc / #+-=&] – Changes the virtual keyboard settings to capital letters, small letters or symbols.

Press CLEAR to clear all entered characters.

To enter a letter with an accent mark:

1.Select a letter using U/u/I/i on the virtual key board.

2.Press INFO/DISPLAY () to display the extended character set.

3.Use I/i to select a character then press ENTER ().

Available languages to enter on the keyboard mode are as follows: English, Spanish, Italian, French, German, Dutch, Portuguese, Swedish, Polish and Czech.

Button	Operation
CLEAR	Deletes the previous character
	at the cursor position.
REPEAT	Inserts a space at the cursor
	position.
m/M	Change the character set of
	the remote control (#+-=&,
	123, ABC or abc)

NOTE

The keypad mode is available only in the [YouTube] and [Picasa Web Albums] features.

HX995TZW-FD.BPANLLK_ENG_3803.indd 74 10. 10. 06 ￿￿ 11:07