42Installation
Connect wireless speakers
When the unit is manufactured, the ID is already set. If an interference occurs or you use a new wireless unit, an ID should be set again.
When the [Wireless Speaker Connection Guide] appears, press PAIRING button on the subwoofer and the receiver.
3
Installation | Subwoofer |
|
Wireless Receiver
-If you see the blue LED indicator light on the woofer and the wireless receiver, the pairing was successful. Select the [Speaker test] to test the connection.
[LOCK] Menu
To access the any features in [LOCK] settings, you must enter the
If you have not entered a password yet, you are prompted to do so. Enter a 
) to create a new password.
Password
You can create or change the password.
[None]
Enter a 
) to create a new password.
[Change]
Enter the current password and press ENTER (
). Enter a 
) to create a new password.
NOTE
If you make a mistake before pressing ENTER (
), press CLEAR. Then input the correct password.
If you forget your password,
If you forget your password, you can clear it using the following steps:
1.Remove any disc that might be in the player.
2.Select [Lock] option in the [Setup] menu.
3.Use number buttons to enter “210499” on the [Lock] Menu. The password is cleared.
10. 10. 06 11:07 |