Installation 29
Video Connection
Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
Video Connection |
TV |
Yellow |
Resolution Setting
The player provides several output resolutions for HDMI OUT jacks. You can change the resolution using [Setup] menu.
1.Press HOME (
).
2.Use I/i to select the [Setup] and press ENTER (
). The [Setup] menu appears.
3.Use U/u to select [DISPLAY] option then press i to move to the second level.
4.Use U/u to select the [Resolution] option
then press ENTER (
) or i to move to the third level.
5.Use U/u to select the desired resolution
then press ENTER (
) to confi rm your selection.
NOTE
•If your TV does not accept the resolution you have set on the player, you can set resolution to
576p (480p) as follows:
1.Press Z.
2.Press x for more than 5 seconds.
•Since several factors affect the resolution of video output, see “Video Output Resolution” on page 90.
3
Installation
10. 10. 06 11:07 |