Vermont Casting H33BDVRRNP manual Operating Instructions

Page 20

Pyromaster© H33BDVRRN/P

Operating Instructions

Glass Information

Only glass approved by the CFM Corporation should be used on this fireplace.

•The use of any non-approved replacement glass will void all product warranties.

•Care must be taken to avoid breakage of the glass.

•Under no circumstances should this appliance be operated without the window frame assembly in place, or with the glass in a damaged condition.

•Replacement glass (complete with gasket) is available through your CFM Harris dealer and should only be installed by a licensed qualified service person.

Louvre Removal

Lower

Window

Clamps

 

Frame

 

Assembly

Window

 

Frame

 

Assembly

 

 

Pull Clamp

 

Hook

 

Push Clamp

 

Handle

 

FP771b

Fig. 36 Window frame assembly removal.

Glass Cleaning

The top louvre panel is removed by lifting the panel vertically and pulling it away from the appliance. (Fig. 35) The lower access door is hinged along the bottom edge and is folded down to allow access.

2.

Louvre

1.

Glass Panel

FP1221

Fig. 35 Remove top louvre panel.

It is necessary to periodically clean glass. During start- up condensation, which is normal, forms on the inside of the glass. This condensation causes lint, dust and other airborne particles to cling to glass surface.

Also initial paint curing may deposit a slight film on the glass. It is therefore recommended the glass be cleaned two or three times with a non-ammonia based household cleaner and warm water (We recommend gas fireplace glass cleaner) within the first few weeks of operation.

After the initial cleaning process the glass should be cleaned two or three times during each operating

Window Frame Assembly Removal

1.Turn the fireplace OFF (including the pilot).

2.If the unit has been operating allow time for the components to cool.

3.Remove the top louvre assembly.

4.Open the lower louvre panel.

5.Release the two clamps securing the lower edge of the window frame assembly by pulling down on the handles. (Fig. 36)

6.Tilt the window frame assembly out slightly at the bottom, lift the window frame assembly up and away from the fireplace.

7.To replace the window frame assembly reverse the procedure.

season depending on the environment in the house.

Clean the glass after the first two weeks of operation.

Installation of Logs,

Lava Rock & Ember Material

Unpack the logs from packaging and remove each log from its wrapping materials.

The logs are fragile and should be handled with care. Keep the packaging material out of the reach of children and dispose of the material in a safe manner.

The individual logs can be easily identified by the numbers cast on the underside of each log.

20

10004798

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Builder Rear Vent Direct Vent Table of Contents Installation & Operating Instructions Locating Your FireplaceFireplace Dimensions Framing DimensionsHearth Clearance to CombustiblesMantels Gas Specifications Gas Line InstallationFraming and Finishing Final FinishingRemote ON/OFF Switch Alternate Switch LocationInstallation General Venting Information-Termination LocationCanadian Installations1 US Installations2 General Venting Information Termination LocationCanadian Installations USA InstallationsGeneral Information on Assembling DV Components Crimped End PipesRear Wall Vent Applications How to Use the Vent GraphTwist Lock Pipes Rear Wall Installations Straight VentingMaximum dimensions Vertical Sidewall ApplicationsVertical Sidewall Installations Maximum elbow usageAlways install horizontal venting on a level plane Zero clearance sleeve is only required for combustible wallsBelow Grade Installations 7DVSKSVertical Through-the-Roof Installation Vertical Through-the-Roof ApplicationsMin ’ 610 mm Twist Lock Venting Components Crimped End Venting Components Operating Instructions Log Identification Chart Flame & Temperature AdjustmentFlame Characteristics LocationLighting And Operating Instructions To Turn Off Gas To HeaterTroubleshooting Honeywell VS8421 Remove Glass Doors Before Service WorkLP Conversion Procedure Air Shutter SettingFuel Conversion Instructions LP Conversion Kit ComponentsBrass Trim MaintenanceBurner and Burner Compartment Pyromaster H33BDVRRN/P Description Part NumberH33BDVRRN/P Optional Accessories Available SpecificationsMaintenance Fan KitsCeramic Refractory Kits Wiring InstructionsEB-1 Electrical Box Do not remove the existing window frame assembly Decorative Bay WindowsRemote Controls Bay Window ScreenTrim Kit Model Functions ControlledLimited Warranty & Extended Life Time Protection

H33BDVRRN, H33BDVRRNP specifications

The Vermont Casting H33BDVRRNP and H33BDVRRN are renowned for their sophisticated design and advanced features, making them excellent choices for those seeking high-quality wood-burning stoves. These stoves are a testament to the perfection of both form and function, showcasing Vermont Casting's commitment to craftsmanship and innovation.

One of the standout features of the H33BDVRRNP and H33BDVRRN is their efficient heat output. With a robust firebox capacity, these stoves can accommodate larger logs, promoting longer burn times. This not only means less frequent tending to the fire but also enhanced heat retention in your home. They offer an impressive BTU range, ensuring that they can effectively warm a variety of spaces, from cozy cabins to expansive living rooms.

Equipped with the latest burn technology, the H33BDVRRNP and H33BDVRRN provide a cleaner, more efficient burn. The stoves utilize a secondary combustion system that significantly reduces emissions, making them an environmentally friendly option. This advanced technology optimizes fuel usage, resulting in less wood consumption and fewer pollutants released into the atmosphere. In addition, the integrated air wash system keeps the glass doors clean, allowing you to enjoy the mesmerizing view of the flames without the hassle of frequent maintenance.

The construction quality of the H33BDVRRNP and H33BDVRRN is evident throughout. Made from solid cast iron, these stoves are built to withstand the rigors of high-heat operations while providing excellent durability and longevity. The heavy-duty materials also contribute to excellent heat retention, ensuring that warmth radiates effectively throughout your home.

Aesthetically, both models boast a classic yet contemporary design, making them suitable for a wide range of interior styles. Available in various finishes, homeowners can easily find a version that complements their décor. The thoughtfully designed airflow control allows users to achieve their ideal burn rate with ease, enhancing both usability and comfort.

In conclusion, the Vermont Casting H33BDVRRNP and H33BDVRRN are exceptional wood-burning stoves that combine efficiency, beauty, and advanced technology. Their features make them a reliable heating source while maintaining a minimal environmental impact, ensuring that you can enjoy the warmth and ambiance of a wood fire without compromising on quality or sustainability.
Top Page Image Contents