Installation & Operating Instructions

Pyromaster© H33BDVRRN/P

This gas appliance should be installed by a qualified installer in accordance with local building codes and with current CSA- B149.1 Installation codes for Gas Burning Appliances and Equipment. For USA Installations follow local codes and/or the current National Fuel Gas Code. ANSI Z223.1.

FOR SAFE INSTALLATION AND OPERATION PLEASE NOTE THE FOLLOWING:

1 . This fireplace gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of high surface temperatures of this fireplace and should stay away to avoid burns or ignition of clothing.

3.CAUTION: Due to high glass surface temperature children should be carefully supervised when in the same room as fireplace.

4.Under no circumstances should this fireplace be modified. Parts removed for servicing should be replaced prior to operating this fireplace again.

5.Installation and any repairs to this fireplace must be performed by a qualified installer, service agency or gas supplier. A professional service person should be con- tacted to inspect this fireplace annually. Make it a practice to have all of your gas fireplaces checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this fireplace should be kept clean and free of dust and lint. Make sure the gas valve and pilot light are turned off before you attempt to clean this fireplace.

7.The venting system (chimney) of this fireplace should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your fireplace clear of combustible materials, gasoline and other flammable vapor and liquids. This fireplace should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or around the fireplace.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this fireplace.

10.The flow of combustion and ventilation air must not be obstructed in any way.

11.When fireplace is installed directly on carpeting, vinyl tile or any combustible material other than wood, the fireplace must be installed on a metal or wood panel extending the full width and depth of the fireplace.

12.This fireplace requires adequate ventilation and combustion air to operate properly.

13.This fireplace must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

14.When the fireplace is not in use it is recommended that the gas valve be left in the OFF position.

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

This appliance has been approved for after-market mobile home installations

IMPORTANT:

PLEASE REVIEW THE FOLLOWING CAREFULLY

Remove any plastic from trim parts before turning the fireplace ON.

It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for your CFM Harris Systems gas fireplace to give off some odor the first time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

Please ensure that your room is well ventilated open all windows.

It is recommended that you burn your fireplace for at least ten (10) hours the first time you use it. If the optional fan kit has been installed, place the fan switch in the “OFF” position during this time.

Locating Your Fireplace

	E	A	B
	Y		B
	Y
		C	X
		C
	D
	Y	X	B
		X	B
		F
			LU584-1
Fig. 1	Locating Gas Fireplace.

A)Flat on wall	B)Cross corner	C) **Island
D)*Room divider	E)*Flat on wall corner	F) Chase installation
Y) 6" minimum

Note (Fig. 1):

**Island (C) and Room Divider (D) installation is possible as long as the horizontal portion of the vent system (X) does not exceed 20 feet (610cm). See details in Venting Section.

*When you install your Vermont Castings, Majestic Products fireplace in(D) Room divider or (E) Flat on wall corner positions (Y), a minimum of 6 inches (153mm) clearance must be main- tained from the perpendicular wall and the front of the fireplace. See (Y) in Fig. 1.

10004798

H33BDVRRN, H33BDVRRNP specifications

The Vermont Casting H33BDVRRNP and H33BDVRRN are renowned for their sophisticated design and advanced features, making them excellent choices for those seeking high-quality wood-burning stoves. These stoves are a testament to the perfection of both form and function, showcasing Vermont Casting's commitment to craftsmanship and innovation.

One of the standout features of the H33BDVRRNP and H33BDVRRN is their efficient heat output. With a robust firebox capacity, these stoves can accommodate larger logs, promoting longer burn times. This not only means less frequent tending to the fire but also enhanced heat retention in your home. They offer an impressive BTU range, ensuring that they can effectively warm a variety of spaces, from cozy cabins to expansive living rooms.

Equipped with the latest burn technology, the H33BDVRRNP and H33BDVRRN provide a cleaner, more efficient burn. The stoves utilize a secondary combustion system that significantly reduces emissions, making them an environmentally friendly option. This advanced technology optimizes fuel usage, resulting in less wood consumption and fewer pollutants released into the atmosphere. In addition, the integrated air wash system keeps the glass doors clean, allowing you to enjoy the mesmerizing view of the flames without the hassle of frequent maintenance.

The construction quality of the H33BDVRRNP and H33BDVRRN is evident throughout. Made from solid cast iron, these stoves are built to withstand the rigors of high-heat operations while providing excellent durability and longevity. The heavy-duty materials also contribute to excellent heat retention, ensuring that warmth radiates effectively throughout your home.

Aesthetically, both models boast a classic yet contemporary design, making them suitable for a wide range of interior styles. Available in various finishes, homeowners can easily find a version that complements their décor. The thoughtfully designed airflow control allows users to achieve their ideal burn rate with ease, enhancing both usability and comfort.

In conclusion, the Vermont Casting H33BDVRRNP and H33BDVRRN are exceptional wood-burning stoves that combine efficiency, beauty, and advanced technology. Their features make them a reliable heating source while maintaining a minimal environmental impact, ensuring that you can enjoy the warmth and ambiance of a wood fire without compromising on quality or sustainability.