Wiring Instructions

Pyromaster© H33BDVRRN/P

The fireplace, when installed, must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electric Code.

For USA installations follow the local codes and the national electrical code ANSI/NFPA No. 70.

Should this fan require servicing or repair the power supply must be disconnected. For rewiring of any replacement parts refer to Figure 43.

Any electrical rewiring of this fan must be done by a licensed electrician.

Fan

Temperature

Sensor

Speed Control

Black

White

Ground

FP1025

Fig. 43 FK24 fan wiring.

EB-1 Electrical Box

The fireplace, when installed, must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code.

For USA installations follow local codes and the national electrical code ANSI/ NFPA No. 70.

3.Remove the plug socket assembly from the EB-1 box.

4.Feed the supply line in through the EB-1 opening in the side of the appliance and then through the back of the EB-1 assembly. (Fig. 44)

5.Connect the black wire of the power supply line to the brass screw (polarized) of the socket assembly.

6.Connect the white wire of the power line to the chrome screw of the socket assembly.

7.Connect the ground wire of the supply line to the green screw of the socket assembly.

8.Refit the socket assembly back into the electrical box and replace the cover plate. Secure the cable with the clamp on the outside of the EB-1 base plate and attach the EB-1 assembly to the unit with the screw removed in step 1.

	Inside		Electrical Box
	Retaining
	Screw
		Front
			of Unit
Outside
		of	Unit
		Front	CFM191a
			CFM191a
Fig. 44	EB-1 receptacle.

It is strongly suggested that the wiring of the EB-1 Electrical Junction Box be carried out by a licensed electrician.

Ensure that the power to the supply line has been disconnected before com- mencing this procedure.

The EB-1 Electrical junction box option is available to allow for the easy connection of an optional fan kit.

To connect the EB-1 box to the house electrical supply follow the steps below.

1.Unscrew the retaining screw from the plate and remove from the appliance. (Fig. 44)

2.Remove the front cover of the EB-1 box.

Ceramic Refractory Kits

Ceramic Refractory Panel Kit #AT1CBB is available for this appliance.

Take care when handling the refractory panels as they are fragile until held in place and supported.

Installation, refer to Figures 45 & 46.

1.Remove the front window frame assembly.

2.Remove the logs.

3.Place the lower supports for the side refractory panels on the base of the firebox. Place each support so that the slotted hole fits over the forward screw head along the edge of the base.

10004798

H33BDVRRN, H33BDVRRNP specifications

The Vermont Casting H33BDVRRNP and H33BDVRRN are renowned for their sophisticated design and advanced features, making them excellent choices for those seeking high-quality wood-burning stoves. These stoves are a testament to the perfection of both form and function, showcasing Vermont Casting's commitment to craftsmanship and innovation.

One of the standout features of the H33BDVRRNP and H33BDVRRN is their efficient heat output. With a robust firebox capacity, these stoves can accommodate larger logs, promoting longer burn times. This not only means less frequent tending to the fire but also enhanced heat retention in your home. They offer an impressive BTU range, ensuring that they can effectively warm a variety of spaces, from cozy cabins to expansive living rooms.

Equipped with the latest burn technology, the H33BDVRRNP and H33BDVRRN provide a cleaner, more efficient burn. The stoves utilize a secondary combustion system that significantly reduces emissions, making them an environmentally friendly option. This advanced technology optimizes fuel usage, resulting in less wood consumption and fewer pollutants released into the atmosphere. In addition, the integrated air wash system keeps the glass doors clean, allowing you to enjoy the mesmerizing view of the flames without the hassle of frequent maintenance.

The construction quality of the H33BDVRRNP and H33BDVRRN is evident throughout. Made from solid cast iron, these stoves are built to withstand the rigors of high-heat operations while providing excellent durability and longevity. The heavy-duty materials also contribute to excellent heat retention, ensuring that warmth radiates effectively throughout your home.

Aesthetically, both models boast a classic yet contemporary design, making them suitable for a wide range of interior styles. Available in various finishes, homeowners can easily find a version that complements their décor. The thoughtfully designed airflow control allows users to achieve their ideal burn rate with ease, enhancing both usability and comfort.

In conclusion, the Vermont Casting H33BDVRRNP and H33BDVRRN are exceptional wood-burning stoves that combine efficiency, beauty, and advanced technology. Their features make them a reliable heating source while maintaining a minimal environmental impact, ensuring that you can enjoy the warmth and ambiance of a wood fire without compromising on quality or sustainability.