Vermont Casting A232 Flame Adjustment RN/RP Models, Flame Characteristics

FLAME ADJUSTMENT (RN/RP MODELS)

For units equipped with Hi/Lo valves, flame adjustment is accomplished by rotating the Hi/Lo adjustment knob located near the centre of the gas control. (Fig. 20a & b)

FLAME CHARACTERISTICS

It is important to periodically perform a visual check of the pilot and the burner flames. Compare them to the pictorials illustrated below (Fig. 22, 23). If any of the flames appear abnormal call a service person.

I

Turn

counterclockwise

to increase

flame height.

L

H

O

Turn clockwise

to lower

flame height.

Fig. 20a

3/8" - 1/2"

SIT VALVE

Turn			Turn clockwise
counterclockwise
			to increase
to decrease
	I	L	flame height.
flame height.
	H	O

Fig. 20b

PSE VALVE

Fig. 22

A232

Fig. 23

- 11 -