Installation Instructions

This gas fireplace should be installed by a qualified installer in accordance with local building codes and with current CAN / CGA-B149 (. 1 or .2) Installation codes for Gas Burning Fireplaces and Equipment.

FOR U.S.A Installations follow local codes and/or the current National Fuel Gas Code. ANSI Z223.1.

FOR SAFE INSTALLATION AND OPERATION OF YOUR FIREPLACE PLEASE NOTE THE FOLLOWING:

1.This fireplace gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of the high surface temperatures of this fireplace and should stay away to avoid burns or ignition of clothing.

3.Children should be carefully supervised when they are in the same room as your fireplace.

4.Under no circumstances should this fireplace be modified. Parts removed for servicing should be re- placed prior to operating this fireplace again.

5.Installation and any repairs to this fireplace should be carried out by a qualified service person. A profes- sional service person should be contacted to inspect this fireplace annually. Make it a practice to have all of your gas fireplaces checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this fireplace should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this fireplace.

7.The venting system(chimney) of this fireplace should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your fireplace clear of combus- tible materials, gasoline and other flammable vapour and liquids. This fireplace should not be used as a drying rack for clothing, nor should Christmas stock- ings or decorations be hung in the area of it.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.)be used in this fireplace.

10.The flow of combustion and ventilation air must not be obstructed in any way.

11.When the fireplace is installed directly on carpeting, vinyl tile or any combustible material other than wood, the fireplace must be installed on a metal or wood panel extending the full width and depth of the fireplace.

12.This fireplace requires adequate ventilation and combustion air to operate properly.

13.This fireplace must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

- 3 -

IMPORTANT:

PLEASE REVIEW THE FOLLOWING CAREFULLY

Remove any plastic from trim parts before turning the fireplace ON.

It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for your gas fireplace to give off some odour the first time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

Please ensure that your room is well ventilated - open all windows.

It is recommended that you burn youf fireplace for a least six

(6)hours the first time you use it. If optional fan kit has been installed, place fan in the "OFF" position during this time.

LOCATING YOUR GAS FIREPLACE

	12"
A	(305mm)	B	D
12" (305mm)		B

			C
E			F
			Fig. 1

A) *Flat on wall corner	B)	*Room divider
C) Island	D)	Cross corner

E)Flat on wall

*A & B must maintain a 12" (305mm) clearance between the wall and side glass of fireplace.

A minimum 12 foot vent height is required to effectively vent this fireplace.

CLEARANCES TO COMBUSTIBLES

Adequate clearances as listed below must be maintained for servicing and proper operation.

BACK	1"
SIDES.. .................................... 12"
COMBUSTIBLE FLOOR.. .......... 0"
TOP	36"
CORNER	0" to back edges

Flue Pipe Clearances - 6" Single Wall, 1"B" Vent.

A232 specifications

The Vermont Castings A232 is a remarkable wood-burning stove that artfully combines aesthetic appeal with advanced technology to deliver efficient heating for your home. Known for its robust construction and classic design, the A232 stands out as a centerpiece in any living space while providing warmth and comfort.

One of the most prominent features of the Vermont Castings A232 is its exceptional build quality. Crafted from heavy-duty cast iron, this stove not only offers durability but also excellent heat retention. The cast iron body ensures that once the stove becomes warm, it continues to radiate heat long after the fire has died down, making it a reliable source of warmth even on the coldest days.

The A232 is equipped with an innovative air-wash system that keeps the glass clean, offering an unobstructed view of the mesmerizing flames. This system enhances the overall aesthetic by ensuring that the glass remains clear, allowing you to enjoy the beauty of the fire without the hassle of frequent cleaning.

Efficiency is another hallmark of the Vermont Castings A232. The stove is designed with a secondary combustion system that maximizes fuel use, resulting in reduced emissions and improved efficiency. This means that not only will you enjoy longer burn times, but you’ll also be contributing to a cleaner environment by minimizing your carbon footprint.

The stove features a large firebox that can accommodate logs up to 18 inches in length, which means fewer refuels throughout the day. Additionally, the A232 includes an adjustable air intake control, allowing users to regulate the burn rate to match heating needs. This versatility is particularly beneficial for those looking to maintain a consistent temperature in their living spaces.

Vermont Castings also focuses on design, and the A232 is no exception. With its traditional style and various enamel finishes, it fits perfectly into both modern and rustic settings, enhancing the overall ambiance of your home.

Overall, the Vermont Castings A232 is a beautifully crafted wood stove that combines functionality, efficiency, and style. With its robust construction, advanced technologies, and eco-friendly features, it remains a top choice for homeowners seeking an effective and aesthetically pleasing heating solution.