Optional FAN KIT FK24 | Vermont Casting A232 instruction

INSTALLATION OF REMOTE

SWITCH FOR RN/RP GAS VALVE

Install on/off switch assembly on either the rear right or left side of the A232 Gas Fireplace.

1.Remove the screw at the back of the cabinet top either on the left or the right side of the fireplace.

2.Position switch assembly onto the back of the fireplace, then fasten two screws as shown in Fig. 5.

3.Attach wiring under the clips on the rear casing (Fig. 5) and install wiring through the rear opening of the fireplace before connecting to the valve as shown in Fig. 4.

VALVE
TPTH			TH
THERMOPILE
TP			TP
TH			TP TH
		P	PILOT
	I
	TOL			ADJ
				ADJ
ON/OFF SWITCH OR
MILLIVOLT THERMOSTAT
				Fig. 4

OPTIONAL FAN KIT - FK24

It will be easier to install the fan before connecting the gas line to the fireplace.

1.Open front access door panel by pulling forward on brass lip.

2.Guide the fan through the opening at the back of the pedestal, with the outlet pointed up and the fan mounting bracket facing the back of the fireplace. The fan mounts over two studs which hold the fan just below the firebox floor. Do not install this fan on the base. Hold the fan in place with the two nuts provided. (Fig. 7)

3.Locate the fan speed control/junction box on screw studs provided on base of the fireplace. Tighten with 3/8" nuts provided.

4.Install thermal sensor element on screw studs located to the right of the gas valve on the burner base.

5.Plug in grounded service cord to a convenient wall receptacle.

THIS FAN ASSEMBLY COMES COMPLETELY WIRED TO ELIMINATE THE NEED FOR ELECTRICIANS. THIS ELECTRICAL DEVICE, WHEN INSTALLED, MUST BE ELECTRICALLY CONNECTED AND GROUNDED IN ACCORDANCE WITH LOCAL CODES. IN THE ABSENCE

On/off switch

assembly

Clips

Screw (through existing hole)

Screw

Wiring for milli-volt gas valves

OF LOCAL CODES, WITH THE CURRENT CSA C22.1 CANADIAN ELECTRICAL CODE.

FOR U.S.A. INSTALLATION: FOLLOW LOCAL CODES AND THE NATIONAL ELECTRICAL CODE ANSI/NFPA NO.70-1984.

Should this fan require servicing, the power supply must be disconnected. For rewiring of any replacement components see Fig. 6.

Fig. 5

	A = Speed Control	C
	B = Temperature Sensor	B
	C = Fan	B
	C = Fan
		A

BLACK

WHITE

GROUND

Fig. 6

Thermal sensor location

Valve

Stud

Fan is installed at the back of the pedestal

Fan speed control/ Junction box

TOP VIEW	Fig. 7

- 6 -

A232 specifications

The Vermont Castings A232 is a remarkable wood-burning stove that artfully combines aesthetic appeal with advanced technology to deliver efficient heating for your home. Known for its robust construction and classic design, the A232 stands out as a centerpiece in any living space while providing warmth and comfort.

One of the most prominent features of the Vermont Castings A232 is its exceptional build quality. Crafted from heavy-duty cast iron, this stove not only offers durability but also excellent heat retention. The cast iron body ensures that once the stove becomes warm, it continues to radiate heat long after the fire has died down, making it a reliable source of warmth even on the coldest days.

The A232 is equipped with an innovative air-wash system that keeps the glass clean, offering an unobstructed view of the mesmerizing flames. This system enhances the overall aesthetic by ensuring that the glass remains clear, allowing you to enjoy the beauty of the fire without the hassle of frequent cleaning.

Efficiency is another hallmark of the Vermont Castings A232. The stove is designed with a secondary combustion system that maximizes fuel use, resulting in reduced emissions and improved efficiency. This means that not only will you enjoy longer burn times, but you’ll also be contributing to a cleaner environment by minimizing your carbon footprint.

The stove features a large firebox that can accommodate logs up to 18 inches in length, which means fewer refuels throughout the day. Additionally, the A232 includes an adjustable air intake control, allowing users to regulate the burn rate to match heating needs. This versatility is particularly beneficial for those looking to maintain a consistent temperature in their living spaces.

Vermont Castings also focuses on design, and the A232 is no exception. With its traditional style and various enamel finishes, it fits perfectly into both modern and rustic settings, enhancing the overall ambiance of your home.

Overall, the Vermont Castings A232 is a beautifully crafted wood stove that combines functionality, efficiency, and style. With its robust construction, advanced technologies, and eco-friendly features, it remains a top choice for homeowners seeking an effective and aesthetically pleasing heating solution.