For Your Safety Read Before Lighting

LIGHTING AND OPERATING INSTRUCTIONS

WARNING: If you do not follow these instructions exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

A.This fireplace has a pilot which must be lit manually. When lighting the pilot follow these instructions exactly.

B.BEFORE LIGHTING smell all around the fireplace area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHATTODOIFYOUSMELLGAS

•Do not try to light any fireplace.

•Do not touch any electric switch

•Do not use any phone in your building

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Applying force or any attempted repair may result in a fire or explosion.

D.Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the fireplace and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above on this label

2.Turn off all electrical power to the fireplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to off position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn clockwise

to "OFF". Do not force.

OFF

PILOT

LO	HI	it	ON
LO	HI	N	ON
	OFF

	O		F
PILOT	T	P	OF
	OLI
EURO SIT	SIT NOVA			HONEYWELL

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above on this label. If you don't smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal in manual).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depressing the piezo spark ignitor until a flame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If after several tries, the pilot will not stay lit, turn the gas control knob to "OFF" and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to "On" position.

13.For Rn/RP appliances turn the On/Off switch to "On" positin or set thermostat to desired setting.

14.Turn on all electrical power to the fireplace.

TO TURN OFF GAS TO FIREPLACE

1.	Turn the On/Off switch to Off position or set the	4.	Push in gas control knob slightly
	thermostat to lowest setting.		and turn clockwise	to
2.	Turn off all electric power to the fireplace if service		"OFF". Do not force.
	is to be performed.	5.	Close control access panel.

3.Open control access panel.

- 12 -

A232 specifications

The Vermont Castings A232 is a remarkable wood-burning stove that artfully combines aesthetic appeal with advanced technology to deliver efficient heating for your home. Known for its robust construction and classic design, the A232 stands out as a centerpiece in any living space while providing warmth and comfort.

One of the most prominent features of the Vermont Castings A232 is its exceptional build quality. Crafted from heavy-duty cast iron, this stove not only offers durability but also excellent heat retention. The cast iron body ensures that once the stove becomes warm, it continues to radiate heat long after the fire has died down, making it a reliable source of warmth even on the coldest days.

The A232 is equipped with an innovative air-wash system that keeps the glass clean, offering an unobstructed view of the mesmerizing flames. This system enhances the overall aesthetic by ensuring that the glass remains clear, allowing you to enjoy the beauty of the fire without the hassle of frequent cleaning.

Efficiency is another hallmark of the Vermont Castings A232. The stove is designed with a secondary combustion system that maximizes fuel use, resulting in reduced emissions and improved efficiency. This means that not only will you enjoy longer burn times, but you’ll also be contributing to a cleaner environment by minimizing your carbon footprint.

The stove features a large firebox that can accommodate logs up to 18 inches in length, which means fewer refuels throughout the day. Additionally, the A232 includes an adjustable air intake control, allowing users to regulate the burn rate to match heating needs. This versatility is particularly beneficial for those looking to maintain a consistent temperature in their living spaces.

Vermont Castings also focuses on design, and the A232 is no exception. With its traditional style and various enamel finishes, it fits perfectly into both modern and rustic settings, enhancing the overall ambiance of your home.

Overall, the Vermont Castings A232 is a beautifully crafted wood stove that combines functionality, efficiency, and style. With its robust construction, advanced technologies, and eco-friendly features, it remains a top choice for homeowners seeking an effective and aesthetically pleasing heating solution.

LIGHTING AND OPERATING INSTRUCTIONS