Vermont Casting 2170 manual Operation

Page 17

Dutchwest Seneca

Operation

The Seneca Controls

Air Controls

The Seneca has two air controls that regulate the amount of air drawn into the stove. Generally, more air entering the stove allows the fire to burn hotter and faster, while less air decreases heat output while prolonging the overall burn time.

The Primary Air control lever is located on the upper right side of the stove front. It is the primary source of air for starting and maintaining fires. It opens when moved clockwise and closes when moved counter- clockwise.

Probe Thermometer

Primary

Access Port

Air

Damper

Control

Lever

 

Combustor

(Not

visible)

Air

Front

Control

 

Loading

 

Door

Side

 

Loading

 

Door

 

 

Ash

 

Door

 

Front

 

Loading Door

 

ST740

Fig. 21 The heater controls.

ACombustor Air Control is located on the left side of the stove, above the side loading door, and delivers preheated air to a strategic internal site to aid catalytic combustion. Turn counterclockwise to open and clock- wise to close.

Damper Function

The Damper is operated by moving the small, square knob on the left side of the stove. It has two positions: open, to start or revive the fire; and closed for greatest efficiency and heat. Using the multipurpose door handle, rotate the damper knob counterclockwise to open the damper and clockwise to close it.

The stove damper must be open when starting a fire, when reloading fuel (for a short time only), and when the side or front doors of the stove are opened for any reason.

Load Doors

ASide Loading Door allows the easiest loading of wood logs. The Front Door opens for adding an occasional log to the fire. The front door may also be opened wide and the spark screen (included with stove) placed in the opening for safe, fireplace-style viewing. When the front door is closed, the fire may still be viewed through the large ceramic viewing window.

A Probe Thermometer Port Provides

Access to Internal Temperatures

Insert the Probe Thermometer into the access port (see directions on Page 16) as a valuable guide that will tell you when to open and close the stove damper, when to increase or decrease the air supply, whether or not the stoveÕs catalytic combustor is working properly, and when to add fuel.

Probe

Thermometer

ST741

Fig. 22 The probe thermometer is a valuable guide to stove operation.

Successful Wood Burning

Woodburning is often said to be more of an art than a science. YouÕll easily master the art if you start by using good, dry fuel and by understanding how the stoveÕs air supply system operates.

Burn Only High-Quality Fuel

Your heater is designed to burn natural wood only. Do not burn other fuels. Never burn pressure-treated wood, painted or stained wood, or glossy newsprint.

High efficiencies and low emissions are possible when burning air-dried, seasoned woods as compared to softwoods or freshly cut hardwoods. Avoid burning ÒgreenÓ wood that has not been properly seasoned.

The best hardwood fuels include oak, maple, beech, ash, and hickory that has been split, stacked, and air- dried outside under cover for at least one year. If

2006063

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Seneca Accessories Table of ContentsSeneca, Model SpecificationsMasonry Chimneys InstallationChimney Types Assembling the Chimney Connector Chimney Connector GuidelinesPrefabricated Chimneys Chimney HeightFreestanding Installations Securing the Connector To a Prefabricated ChimneySecuring the Connector to a Masonry Chimney Wall Pass-Throughs Fireplace Installations Above the FireplaceFireplace Installations Through the Fireplace Wall pass-through enclosed with noncombustible materials Floor ProtectionKeep the Stove a Safe Distance from Surrounding Materials Floor Protection for FireplaceFireplace and Mantel Trim Shields Safe Ways to Reduce ClearancesWall Shields Fireplace and Mantel Trim Clearances Heat shield, no connector Stove InstalledShields on connector1,2 Parallel to WallSeneca Clearance Diagrams Wall Shield Requirements for Common Seneca Installations InCorner Parallel to Wall Install Catalytic Probe AssemblyInstall Air Duct for Outside Air Unpack the PartsOperation Seneca Control Settings Burn Rate Primary Air Combustor Air Use the Air Control Settings That Work Best for YouHigh-Efficiency Wood Burning With Catalytic Combustion How to Build a Wood Fire Keep it GoingConditioning Your Stove Starting and Maintaining a Wood FireYou will soon find out that this stove is HOT While Always Dispose of Ash in a Safe Manner Reloading and Reviving a Wood FireRemove and Store Ash Safely Test And Repair the Door Gaskets MaintenanceCleaning the Glass Repair Missing Cement in Seams Damper AdjustmentAvoid Damaging the Glass Door Panel Replace Broken Glass ImmediatelyRemove and Inspect the Combustor When to Suspect a Combustor ProblemCare of the Catalytic Combustor Watch for Better Results Stove Maintenance ScheduleChimney Connector Catalytic Combustor Draft Management Single Venting Draft TestingFuel CreosoteHow to Obtain Service Warranty

2170 specifications

The Vermont Casting 2170 is a remarkable wood stove that combines classic styling with modern efficiency, making it a favored choice for homeowners looking to enhance their heating options. Renowned for its performance, this wood stove stands out due to its unique blend of traditional craftsmanship and innovative technology.

One of the primary features of the Vermont Casting 2170 is its robust construction. Made from high-quality cast iron, the stove not only ensures durability but also efficient heat retention. This material allows the stove to radiate warmth long after the fire has died down, offering prolonged comfort during the coldest months. With a striking design that includes elegant arches and detailed accents, the 2170 serves as a functional art piece in any living space.

The heating capacity of the Vermont Casting 2170 is impressive, boasting an output of up to 75,000 BTUs, which can effectively heat large areas up to 2,100 square feet. This makes it suitable for both smaller homes and larger spaces needing efficient heating solutions. Its large firebox can accommodate larger logs, enabling longer burn times and reducing the frequency of loading during the evening.

Another notable feature is its advanced air intake system, which promotes efficient combustion. This system not only optimizes fuel consumption but also minimizes emissions, making the 2170 an environmentally friendly choice. Additionally, it features a secondary combustion system, ensuring that burning gases are consumed for maximum heat and minimal waste.

The Vermont Casting 2170 also incorporates a convenient, easy-to-use ash pan, allowing users to clean out ash without hassle, contributing to a more streamlined maintenance experience. With an adjustable air control mechanism, users can easily regulate the burn rate, ensuring the perfect balance between heat output and fuel efficiency.

Overall, the Vermont Casting 2170 exemplifies a perfect fusion of vintage aesthetics and contemporary technology. Its durable construction, substantial heating capacity, and environmentally conscious features make it a top choice among wood stoves, creating a warm, inviting atmosphere while also being kind to the planet. For anyone looking to invest in a wood stove that combines style, functionality, and sustainability, the Vermont Casting 2170 is a compelling option that stands the test of time.
Top Page Image Contents