Vermont Casting 2170 manual Warranty, How to Obtain Service

Page 30

Dutchwest Seneca

Warranty

Limited Three Year Warranty

Vermont Castings, Majestic Products warrants that this Seneca Stove will be free of defects in material and workmanship for a period of three years from the date you receive it, except that the catalyst, thermostats, handles, glass door panel, cement and gasketing shall be warranted as described below.

Vermont Castings, Majestic Products will repair or replace, at its option, any part found to be defective upon inspection by a Vermont Castings, Majestic Products Authorized Dealer. The customer must return the defective part or the stove, with shipping prepaid, to the Authorized Dealer or pay for any Authorized Dealer in-home travel fees or service charges for in- home repair work. It is the dealer's option whether the repair work will be done in the customer's home or in the dealer's shop. If, upon inspection, the damage is found to be the fault of the manufacturer, repairs will be authorized at no charge to the customer for parts and/or labor.

Any Seneca or part thereof that is repaired or replaced during the limited warranty period will be warranted for a period not to exceed the remaining term of the original limited warranty or six

(6) months, whichever is longer.

Limited One Year Warranty

The following parts of the Seneca are warranted to be free of defects in material and workmanship for a period of one year from the date you receive it. These parts are the thermostats, handles, glass door panels, cement, and gasketing. Any of these items found to be defective will be repaired or replaced at no charge, upon the return of said part to a Vermont Castings, Majestic Products authorized dealer with postage prepaid.

Any part repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six (6) months, whichever is longer.

Limited Catalyst Warranty

The catalyst will be warranted for a six (6) year period as follows: If the original catalyst or a replacement catalyst proves defective or ceases to maintain 70% of its particulate emission reduction activity (as measured by an approved testing proce- dure) within 24 months from the date the Seneca is received, the catalyst will be replaced free. For stove purchases made after June 20, 1990, a third year (25-36 months) of no charge replacement will be made when combustor failure is due to thermal degradation of the substrate (crumbling of ceramic material).

From 25-72 months a prorated credit will be allowed against a replacement catalyst and the cost of labor necessary for replacement at the time of replacement.

The customer must pay for any in-home travel fees, service charges, or transportation costs for returning the Seneca to the Authorized Dealer.

 

Amount of Time

Credit Towards

 

Since Purchase

Replacement Costs

 

00 - 24 months

100%

 

25 - 36 months

50%

 

37 - 48 months

30%

 

49 - 60 months

20%

30

61 - 72 months

10%

 

 

Any replacement catalyst will be warranted under the terms of the catalyst warranty for the remaining term of the original warranty. The purchaser must provide the following information in order to receive a replacement catalyst under the terms of this limited warranty:

1.Name, address and telephone number.

2.Proof of original purchase date.

3.Date of failure of catalyst.

4.Any relevant information or circumstances regarding determination of failure.

5.In addition, the owner must return the failed catalyst.

Exclusions & Limitations

1.This warranty is transferable; however, proof of original purchase is required.

2.This warranty does not cover misuse of the Seneca as described in the Owner's Guide, nor does it cover a Seneca that has been modified unless authorized by a Vermont Castings, Majestic Products representative in writing.

3.The salt air environment of coastal areas, or a high-humidity environment, can be corrosive to the porcelain enamel finish. These conditions can cause rusting of the cast iron beneath the porcelain enamel finish, which will cause the porcelain enamel finish to flake off. This warranty does not cover damage to the Seneca caused by salt air or high humidity environment, or from burning salt saturated wood, chemically treated wood or any fuel not recommended in the OwnerÕs Guide.

4.This warranty does not cover a Seneca repaired by some- one other than a Vermont Castings, Majestic Products Authorized Dealer.

5.Damage to the unit while in transit is not covered by this warranty but is subject to claim against the common carrier. Contact the Authorized Dealer from whom you purchased your Seneca (Do not operate the stove as this may negate the ability to process the claim with the carrier.)

6.Claims are not valid where the installation does not conform to local building and fire codes or, in their absence, to the recommendations in the OwnerÕs Guide.

How to Obtain Service

If a defect is noted within the warranty period, the customer should contact a Vermont Castings, Majestic Products Autho- rized Dealer with the following information:

1.Name, address, and telephone number of the purchaser.

2.Date of purchase.

3.Serial number from the label on the inside of the load door.

4.Nature of the defect or damage.

5.Any relevant information or circumstances, e.g., installation, mode of operation when defect was noted.

A warranty claim process will then begin. Vermont Castings, Majestic Products reserves the right to withhold final approval of a warranty claim pending a visual inspection of the defect by authorized representatives.

© Vermont Castings, Majestic Products

2006063

Image 30
Contents Seneca Table of Contents AccessoriesSpecifications Seneca, ModelInstallation Chimney TypesMasonry Chimneys Prefabricated Chimneys Chimney Connector GuidelinesAssembling the Chimney Connector Chimney HeightSecuring the Connector To a Prefabricated Chimney Securing the Connector to a Masonry ChimneyFreestanding Installations Fireplace Installations Above the Fireplace Fireplace Installations Through the FireplaceWall Pass-Throughs Floor Protection Wall pass-through enclosed with noncombustible materialsFloor Protection for Fireplace Keep the Stove a Safe Distance from Surrounding MaterialsSafe Ways to Reduce Clearances Wall ShieldsFireplace and Mantel Trim Shields Fireplace and Mantel Trim Clearances Shields on connector1,2 Stove InstalledHeat shield, no connector Parallel to WallSeneca Clearance Diagrams Wall Shield Requirements for Common Seneca Installations InCorner Parallel to Wall Install Air Duct for Outside Air AssemblyInstall Catalytic Probe Unpack the PartsOperation Use the Air Control Settings That Work Best for You Seneca Control Settings Burn Rate Primary Air Combustor AirConditioning Your Stove How to Build a Wood Fire Keep it GoingHigh-Efficiency Wood Burning With Catalytic Combustion Starting and Maintaining a Wood FireYou will soon find out that this stove is HOT While Reloading and Reviving a Wood Fire Remove and Store Ash SafelyAlways Dispose of Ash in a Safe Manner Maintenance Cleaning the GlassTest And Repair the Door Gaskets Avoid Damaging the Glass Door Panel Damper AdjustmentRepair Missing Cement in Seams Replace Broken Glass ImmediatelyWhen to Suspect a Combustor Problem Care of the Catalytic CombustorRemove and Inspect the Combustor Watch for Better Results Maintenance Schedule Chimney ConnectorStove Catalytic Combustor Draft Management Fuel Draft TestingSingle Venting CreosoteWarranty How to Obtain Service

2170 specifications

The Vermont Casting 2170 is a remarkable wood stove that combines classic styling with modern efficiency, making it a favored choice for homeowners looking to enhance their heating options. Renowned for its performance, this wood stove stands out due to its unique blend of traditional craftsmanship and innovative technology.

One of the primary features of the Vermont Casting 2170 is its robust construction. Made from high-quality cast iron, the stove not only ensures durability but also efficient heat retention. This material allows the stove to radiate warmth long after the fire has died down, offering prolonged comfort during the coldest months. With a striking design that includes elegant arches and detailed accents, the 2170 serves as a functional art piece in any living space.

The heating capacity of the Vermont Casting 2170 is impressive, boasting an output of up to 75,000 BTUs, which can effectively heat large areas up to 2,100 square feet. This makes it suitable for both smaller homes and larger spaces needing efficient heating solutions. Its large firebox can accommodate larger logs, enabling longer burn times and reducing the frequency of loading during the evening.

Another notable feature is its advanced air intake system, which promotes efficient combustion. This system not only optimizes fuel consumption but also minimizes emissions, making the 2170 an environmentally friendly choice. Additionally, it features a secondary combustion system, ensuring that burning gases are consumed for maximum heat and minimal waste.

The Vermont Casting 2170 also incorporates a convenient, easy-to-use ash pan, allowing users to clean out ash without hassle, contributing to a more streamlined maintenance experience. With an adjustable air control mechanism, users can easily regulate the burn rate, ensuring the perfect balance between heat output and fuel efficiency.

Overall, the Vermont Casting 2170 exemplifies a perfect fusion of vintage aesthetics and contemporary technology. Its durable construction, substantial heating capacity, and environmentally conscious features make it a top choice among wood stoves, creating a warm, inviting atmosphere while also being kind to the planet. For anyone looking to invest in a wood stove that combines style, functionality, and sustainability, the Vermont Casting 2170 is a compelling option that stands the test of time.