with the hole in the front flange of the movable air door. See | when rotated upward, and can be locked open by pulling for- |
Figure 18. | ward into the notch at the top of the control lever bracket. |
| 10. To close, simply disengage by letting the lever rotate down- |
| ward. The air door will remain closed by magnetic action. |
| See Figure 21. |
OUTSIDE AIR
ROD BRACKET
OPEN
Figure 18
FRESH AIR ROD (CONTROL LEVER)
DAMPER
ASSEMBLY
OUTER | LEFT SIDE VIEW |
CASING | OF FIREBOX OPENING |
FRESH AIR | Figure 21 |
ROD | TOP CUTAWAY |
| VIEW |
OUTSIDE AIR | 1 |
ROD BRACKET |
4
Figure 19
7.Once the control rod is fed through the air door hole, gently lift the outer air door plate assembly inward and upward until the mounting holes in the plate line up with the pilot holes in the side wrap.
8.Install (4) screws to retain the Air Door assembly. See Fig- ure 20.
6
2 | 3 |
| |
7 | 5 |
8 |
|
FRESH AIR KIT PARTS LIST
INDEX | PART |
| QUANTITY |
NO. | NO. | DESCRIPTION | SUPPLIED |
1 | 10124 | OUTSIDE AIR HOOD | 1 |
2 | 18476 | OUTSIDE AIR TUBE ASSEMBLY | 1 |
3 | R8196 | WASHER, SILICONE (BV) | 1 |
4 | 19548 | DAMPER ASSEMBLY | 1 |
|
|
|
|
5 | R8047 | TUBULAR CLIP (BV) | 1 |
6 | R8189 | ROD, FRESH AIR (BV) | 1 |
7 | R8703 | ROD, AIR CONTROL (FB) | 1 |
8 | 20473 | BRACKET, OUTSIDE AIR ROD (FB) | 1 |
Figure 20
9.Remove vise grip from control rod, then check the operation of the Air Door. The control lever should open the air door
Page 10 |