Empire Comfort Systems BP)-1, PV-28SV50-BN, PV-28SV55-CN, GN, GP)-1

GAS CONVERSION INSTRUCTIONS

Warning: Conversion must be done by a qualiﬁed service technician. Main burner oriﬁce(s) and new gas conversion label are provided in conversion kit attached to manifold pipe.

CONVERSION INSTRUCTIONS FROM NATURAL GAS TO (LP) PROPANE GAS

1.Turn OFF gas supply and electrical power to ﬁreplace.

2.Remove lower front panel.

3.Unscrew regulator stem from gas valve and reverse regulator stem to the propane gas position and screw stem back into gas valve. The propane gas arrow will be pointing at the gas valve in the propane gas position. See Figure 46.

4.Open four (4) door latches in order to pivot open the front door.

5.Remove logs from ﬁreplace.

Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

6.Disconnect caps and plugs on ﬂame sensor and hot surface ignitor.

7.Remove log plate from interior of ﬁreplace by removing twelve (12) screws. See Figure 56.

8.Remove front burner (one (1) screw).

9.Use 3/8” socket or wrench to remove natural gas front burner oriﬁce marked 1.50 from oriﬁce ﬁtting. Replace with propane gas front burner oriﬁce marked 1.10 into oriﬁce ﬁtting.

10.Remove natural gas front burner bushing from throat (Venturi) of front burner. See Figure 47.

11.Replace front burner with one (1) screw from Step 8.

12.Remove rear burner (one (1) screw).

13.Use 3/8” socket or wrench to remove natural gas rear burner oriﬁce marked 43 from oriﬁce ﬁtting. Replace with propane gas rear burner oriﬁce marked 1.45 into oriﬁce ﬁtting.

14.Replace rear burner with one (1) screw from Step 12.

15.Connect caps and plugs on ﬂame sensor and hot surface ignitor.

16.Install log plate into ﬁreplace with twelve (12) screws from Step 7.

17.Replace logs into ﬁreplace. Refer to page 18, Log Placement, for correct placement of logs.

18.Close front door by securing four (4) door latches.

19.Replace front panel.

20.Place Natural gas main burner oriﬁces and front burner bushing into conversion kit. Attach conversion kit to manifold pipe. At- tach gas conversion label adjacent to ﬁreplace nameplate indicating that the ﬁreplace was converted to Propane gas.

21.Turn ON gas supply to Fireplace and check all gas connections for leaks with soap solution, watching for bubbles on all gas connections.

22.Turn ON electrical power to ﬁreplace and turn on ﬁreplace to verify proper operation. It may take several tries for ignition to completely purge all the air from the gas line.

REGULATOR STEM

Figure 46

REMOVE BUSHING FOR LP GAS

Figure 47

Page 40

22618-17-0308

BP)-1, GN, PV-28SV50-BN, CP, GP)-1 specifications

Empire Comfort Systems is renowned for producing high-quality heating products, and the GP-1, GN, PV-28SV55-CN, CP, BP-1 is no exception. This comprehensive heating solution combines innovative technologies with practical features designed to enhance comfort and efficiency in various environments.

The GP-1 model is a direct vent gas log set that showcases the brand's commitment to producing clean and efficient heating options. One of its standout characteristics is its ability to operate without needing a traditional chimney, making it an excellent choice for homes where a fireplace may not have been previously installed. The direct vent design uses outside air for combustion, ensuring optimal efficiency while minimizing energy loss.

What sets the GN model apart is its impressive output capacity. Engineered for robustness, this gas heater can deliver significant warmth, making it ideal for larger spaces or homes in colder climates. The unit is designed to heat quickly and evenly, providing a comfortable living environment without drastic fluctuations in temperature.

The PV-28SV55-CN brings advanced technology into the fold with its vent-free capabilities. This feature allows for installation flexibility, as it can be positioned in various spaces without requiring venting to the outside. This characteristic not only simplifies installation but also allows users to enjoy the warmth without the hassle of dealing with exterior vents.

The CP and BP-1 models focus on user convenience and safety. Both are equipped with state-of-the-art control systems that allow users to manage their heating options easily. The intuitive controls facilitate temperature adjustments, ensuring users can maintain their preferred heat levels effortlessly. Additionally, safety features such as oxygen depletion sensors (ODS) provide peace of mind by automatically shutting off the unit if unsafe conditions arise.

In terms of design, Empire Comfort Systems has ensured that these models fit seamlessly into any décor. The stylish aesthetic, combined with a variety of finish and style options, allows homeowners to choose a gas fireplace that complements their interior design.

In conclusion, the Empire Comfort Systems GP-1, GN, PV-28SV55-CN, CP, BP-1 represents a harmonious blend of advanced technology, safety features, and elegant design. It is an exemplary choice for anyone seeking to enhance their home's warmth and efficiency while enjoying the beauty and ambiance a gas heating solution can provide. With a focus on comfort, reliability, and aesthetic appeal, these models stand out as top contenders in the market for home heating solutions.