Empire Comfort Systems VFP32FP, VFP36FP, 31)L(N, P)-1 Operation INSTRUCTIONS/FLAME Appearance

Page 16

OPERATION INSTRUCTIONS/FLAME APPEARANCE

Flames from the pilot (rear right back side of the pan burner) as well as the main flame should be visually checked as the log set is installed.

In normal operation at full rate after 10 to 15 minutes, the flame appearance should be sets of yellow flames.

NOTE: All flames will be random by design, flame height will go up and down.

Glowing embers (rock wool) can cover the pan burner in between the front and middle logs, but very little is necessary to cover this area. Excess ember material causes the yellow flame to become orange and stringy. Apply just enough to obtain slow glow and a gold yellow flame.

Avoid any drafts that alter burner flame patterns. Do not allow fans to blow directly into fireplace. Do not place a blower inside the burner area of the firebox. Ceiling fans may create drafts that alter flame patterns. Sooting and improper burning will result.

During manufacturing, fabricating and shipping, various components of this appliance are treated with certain oils, films or bonding agents. These chemicals are not harmful, but may produce annoying smoke and smells as they are burned off during the initial operation of the appliance, possibly causing headaches or eye or lung irritation. This is a normal and temporary occurrence.

The initial break-in operation should last 2-3 hours with the burner at the highest setting. Provide maximum ventilation by opening windows or doors to allow odors to dissipate. Any odors remaining after this initial break-in will be slight and will disappear with continued use.

PERIODIC CLEANING – Refer to parts diagram for location of items discussed below.

•Do not use cleaning fluid to clean logs or any part of heater.

•Logs - brush with soft bristle brush or vacuum with brush attachment.

•Remove loose particles and dust from the burner areas, controls, piezo covers and grate. Don’t remove ceramic media from inside burner box.

•Inspect and clean burner air intake hole. Remove lint or particles with brush. Failure to keep air intake hole clean will result in sooting and poor combustion.

ANNUAL CLEANING/INSPECTION – Refer to parts diagram for location of items discussed below.

•Inspect and clean burner air intake hole. Remove lint or particles with vacuum or brush. Failure to keep air intake hole clean will result in sooting and poor combustion.

•Inspect and clean all burner ports.

•Inspect ODS pilot for operation and accumulation of lint at air intake holes.

•Verify flame pattern and log placement for proper operation.

•Verify smooth and responsive ignition of main burner.

•Check level of ceramic media in burner. Burner should be full, up to the level of openings in burner top.

Page 16

20101-0-0306

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Installation Instructions Table of Contents Important Safety Information Safety Information for Users of LP-GAS LP-GAS Warning OdorIntroduction Model SpecificationsMinimum Firebox Opening Unusually Tight Construction Unusually tight construction is defined as construction whereVentilation Air From Inside Building OutdoorsVentilation Air Ventilation Air From Inside Building Figure Ventilation Air From Outdoors FigureInstalling a New Main Gas Cock GAS SupplyClearances Checking Manifold PressureVFP32,36FP30,31 Millivolt Control Minimum Wall and Ceiling Clearances FigureCombustible Materials Fireplace Dimensions Planning Installation Installing Hood and Trim KITFinishing Fireplace Framing and Installation Placement of Glowing Embers and Lava Rock Placing Lava Rock in Front of Burner on Fireplace FloorOperation INSTRUCTIONS/FLAME Appearance For Your Safety Read Before Lighting VFP32,36FP30,31 Lighting InstructionsFor Your Safety Read Before Lighting VFP32,36FP20,21 Lighting InstructionsPilot Flame Characteristics Wiring MaintenanceCheck 750 Millivolt System Operation Remote ReceiverGas odor even when control knob is in OFF position Heater produces a whistling noise when main burner is litAppliance produces unwanted odors Appliance shuts off during use. Pilot stays onParts List Wire AssemblyHOW to Order Repair Parts Parts ViewOptional Variable Speed Blower Installation Instructions FBB4 Blower InstallationBlower Motor WiringBlower Wheels Junction BOX Wiring Installation Instructions Optional Brick Liner Installation InstructionsService Notes

VFP32FP, VFP36FP, P)-1, 31)L(N, 21)L(N specifications

Empire Comfort Systems is a well-recognized name in the heating and appliance industry, known for its quality products and innovative technologies. Among their impressive offerings are the VFP32FP, VFP36FP, and VFP21)L(N,31)L(N,P)-1 series gas fireplaces, designed to provide warmth, ambiance, and efficiency for modern homes.

The VFP32FP is a versatile unit that seamlessly blends into various room designs. With a 32-inch viewing area, it showcases a beautiful flame while offering an impressive heat output. This model features a heat exchanger that ensures maximum warmth reaches the living space without excessive energy use. The VFP32FP also comes equipped with a millivolt system that allows for easy operation, even during power outages.

The VFP36FP is ideal for those seeking a larger fireplace experience. With a 36-inch viewing area, it not only enhances the aesthetic of any space but also produces substantial heat to combat chilly nights. What sets the VFP36FP apart is its high-efficiency design, ensuring lower emissions and reduced gas consumption. The unit's adjustable flame and thermostat controls allow homeowners to customize their heating needs easily.

Empire's VFP21)L(N,31)L(N,P)-1 offers a compact yet powerful heating solution. This fireplace is perfect for smaller spaces without sacrificing performance. It comes with a robust design and various decorative options to match any interior style. The advanced technology utilized in this model ensures efficient heat distribution, making it a practical choice for cozy living areas.

All models boast a range of features that enhance usability and comfort. They come with convenient remote control options, allowing for easy operation from anywhere in the room. The emphasis on safety is evident through the inclusion of glass safety screens and built-in safety shut-off systems.

Empire Comfort Systems has committed to sustainability, and these fireplaces exemplify that dedication. Each model is engineered to provide eco-friendly heating solutions, contributing to reduced carbon footprints while delivering exceptional performance.

In summary, the Empire Comfort Systems VFP series, including the VFP32FP, VFP36FP, and VFP21)L(N,31)L(N,P)-1, represents the perfect blend of innovation, efficiency, and beauty. With robust features and cutting-edge technology, these gas fireplaces fulfill the heating needs of contemporary homes while enhancing their visual appeal. Homeowners can enjoy warmth, style, and peace of mind knowing they have chosen a reliable and efficient product from Empire Comfort Systems.
Top Page Image Contents